Analysis of stiffened plate using FE Approach
Journal Title: International Journal of Modern Engineering Research (IJMER) - Year 2014, Vol 4, Issue 7
Abstract
The objective of the present investigation is to study the strengthening effect of the stiffeners on the buckling of unperforated and perforated plate when they are reinforced in longitudinal and transverse directions. The plate is subjected to inplane uniform uniaxial end compression load having simply supported plate boundary condition. The parameters considered are plate aspect ratio, area ratio and types of stiffeners. The analysis has been carried out using ANSYS finite element software. The buckling analysis shows that the influence of transverse stiffener is less when compared to longitudinal stiffener
Authors and Affiliations
Anupama B. M , Jayashankar babu B. S
Keywords
Related Articles
- EP ID EP116216
- DOI -
- Views 119
- Downloads 0
Numerical Characterization of the Pores and the Determination of the Point Of Crack Initiation in Some Cast Aluminum Alloys
Abstract: Porosity is a major defect in cast aluminum alloys affecting in particular, the fatigue strength. In this work, fractal analysis of the pores in the microstructure of cast aluminum alloys were done to pro...
Estimation of optimal cutting parameters of plane turning using quantum inspired evolutionary algorithm
Turning is a versatile machining process that involves different cutting parameters and conditions. The surface finish is the vital design requirement as it is a key indicator of quality of the work piece. This wor...
Wear Rate Analysis of Hydrodynamic Journal Bearing In Different Conditions
Friction and wear always occur at machine parts which run together. This affects the efficiency of machines negatively. Hydrodynamic journal bearings are widely used in industry because of their simplicity, efficiency an...
Variable Threshold MOS Circuits
Dynamic threshold MOS (DTMOS) circuits provide low leakage and high current drive , compared to CMOS circuits, operated at low voltages. This paper proposes a modified DTMOS approach, called Variable threshold MOS (VTMOS...
[b][i]Improving the Stability of Cascaded DC Power Supply System by Adaptive Active Capacitor Converter[/i][/b]
When all links are changes in the cascade is the corner of the shape in the dc division energy orbit (DEO). When resistances are intermission betwixt one by one stylish changes in that would possibly end up so...