Analytical model of asymmetrical Mixed-Mode Bending test of adhesively bonded GFRP joint
Journal Title: Frattura ed Integrità Strutturale - Year 2015, Vol 9, Issue 34
Abstract
This paper presents new analytical model of asymmetric mixed-mode bending (MMB) specimen of adhesively bonded pultruded GFRP joints. An easily applicable relationship for the calculation of the strain energy release rate of the asymmetric MMB specimens is proposed based on the beam theory. The model is capable to analyze stacking sequence as well as various crack propagation paths. In the paper the effect of the various fiber bridging length and different crack propagation paths is analyzed analytically and supported by experimental results. The methodology and results presented in this paper could be utilized for the design of both joint geometry and lay-up of the laminates constituting the joint or for the prediction of the fracture behavior of such structures.
Authors and Affiliations
M. Ševčík, P. Hutař, A. Vassilopoulos
Keywords
Related Articles
- EP ID EP122792
- DOI 10.3221/IGF-ESIS.34.23
- Views 79
- Downloads 0
Numerical study of the response of dynamic parameters to defects in composite structures
The purpose of this work is to study three different models of delamination in composite plate (the free mode model, the constrained model and the contact model) and applicability of this models to the vibrational...
Thermal degradation in Carrara marbles as the cause of deformation of cladding slabs
Marble slabs, typically used as façade panels to externally cover buildings, might permanently deform after a certain time of environmental exposure. This phenomenon, called bowing, is generally accompanied by a...
Effect of weld parameter on mechanical and metallurgical properties of dissimilar joints AA6082–AA6061 in T6 condition produced by FSW
The effect of processing parameters on the mechanical and metallurgical properties of dissimilar joints of AA6082–AA6061 produced by friction stir welding was analysed in this study. Different FSW samples were prod...
Fatigue failure of welded connections at orthotropic bridges
Orthotropic decks were applied to the long span bridges after World War II due to several advantages, such as light weight, high strength, few deck joints, durability, rapid construction, life-cycle economy. The fatigue...
Multiaxial fatigue of cast aluminium EN AC-42000 T6 (G-AlSi7Mg0.3 T6) for automotive safety components under constant and variable amplitude loading
Regarding the fatigue behaviour of EN AC-42000 T6 (A 356 T6), which is the most frequently used cast aluminium alloy for automotive safety components, especially under non-proportional constant and variable n...