DESIGN AND ANALYSIS OF FEMORAL NAIL EXTRACTION INSTRUMENT FOR HUMAN FEMUR BONE
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 5, Issue 9
Abstract
Different conventional techniques have been noticed to remove intramedullary femur distal nail, a simple method is explained to remove a broken distal closed section intramedullary nail with nail extraction instrument. The surgical technique is described. This technique reduces physical torture of patient during surgery and headache of doctors. In this article the design procedure for nail extraction instrument is explained as well as analysis results (in ANSYS) of nail extraction instrument are discussed. This technique involves removal of distal broken femur nail by on the spot creating threads in the nail, which is one of the feasible technique & the results of this analysis are helpful for orthopedic surgeons for clinical interest.
Authors and Affiliations
A. G. Pawar
Keywords
Related Articles
- EP ID EP107251
- DOI 10.5281/zenodo.155093
- Views 61
- Downloads 0
SEISMIC EVALUATION OF REINFORCED CONCRETE BUILDING
In the study of evaluation for retrofitting of any building made up of reinforced concrete is done by using method of inelastic method, capacity curve method etc. Capacity curve which is load deformation plot is o...
DESIGN AND DEVELOPMENT OF MOTHER MOULD OF HYDRAULIC PRESS
Accurate die fixing is an important stage of the hydraulic press with the precised value of clearance. At present the hydraulic press depend on the fixing of die inside the moul d cavity with help of mechanical wedges...
High-Speed Pool of Aggregated Data in Multi-hop Wireless Network
Data aggregation is a key functionality in wireless sensor networks (WSNs). Focuses on data aggregation scheduling problem to minimize the delay (or latency). The project proposes an efficient distributed algorith...
MODELING, DESIGN, AND CONTROL OF ASYNCHRONOUS BUCK CONVERTER FOR MOBILE APPLICATION
The aim of this paper is to model and design an open-loop and close-loop asynchronous Buck switching converter for mobile applications. The design of the converter is performed to step-down the input voltage 12V t...
Thermodynamic Analysis of Cogeneration Power Plant
The aim of this work is to use the energy analysis based on the first law of thermodynamics to identify the locations and magnitudes of losses in order to maximise the performance of a 25 MW plant at Saukem Ltd.,...