Developments in Electrical Discharge Grinding process: A review
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 3, Issue 4
Abstract
Electrical discharge grinding (EDG) is a hybrid process involving energy of sparking as well as mechanical grinding. The machining of thin and fragile material is very difficult for manufacturing industries and rapid demand of requirement could not be achieved. Electrical discharge machining is more acceptable machine tool for machining hard and brittle electrically conductive materials but its productivity is very low. In past decade, researchers have focused on EDG for machining these materials because there is no mechanical forces exerted on work piece during machining and it gives better performances than EDM due to the rotating speed of wheel. Therefore, the objective of this paper is to review the array of research works carried out on EDG process. It also focuses on recent developments for practical applications.
Authors and Affiliations
Dr. Govindan P
Keywords
Related Articles
- EP ID EP153534
- DOI -
- Views 64
- Downloads 0
MICROSTRUCTURE AND MECHANICAL PROPERTIES OF ASS (304)-FSS (430) DISSIMILAR JOINTS IN SMAW & GTAW PROCESS
The current study presents some fundamental observations on the microstructure and mechanical properties in SMAW and GTAW process, formed by AISI 304 (ASS) and AISI 430 (FSS) with AWS E308L austenitic stainless s...
ENERGY EFFICIENT LEACH PROTOCOL IN WSN
A sensor node hold small amount of resources in terms of processor, battery power, memory and communication range, but when a huge number of sensor nodes work together they are able to complete a good volume of tas...
Analysis Of Upfc Based Damping Controller On A Single Machine Infinite Bus
The investigations reveal that the damping controllers based on UPFC control parameters
A Study on Image Registration for Remote Sensing Images
Image registration is one of the challenging tasks in image processing problems. The problem of image registration is to find a geometrical transformation that aligns points in one view of an image with correspond...
HARMONIC ANALYSIS OF ROTARY COMPRESSOR USING FEA
Frequency response analysis is performed out under the application of the self weight of the rotary compressor as the force on the model with in the Frequency range of 0-100 Hz. This particular range is selected s...