EFFECT OF DIFFERENT TOOL PIN PROFILE ON THE MECHANICAL PROPERTIES OF MAGNESIUM BASED ALLOY AZ91 BY FRICTION STIR WELDING
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 0, Vol 4, Issue 10
Abstract
The usage of magnesium in automotive applications is also assessed for the impact on environmental conservation. Recent developments in coating and alloying of Mg improved the creep and corrosion resistance properties of magnesium alloys for elevated temperature and corrosive environments. The results of the study conclude that reasonable prices and improved properties of Mg and its alloys will lead to massive use of magnesium. Compared to using alternative materials, using Mg alloys results in a 22% to 70% weight reduction. The joining of magnesium alloy was successfully carried out using FSW technique. . In this paper effect of different tool pin profile on mg az 91 alloy is calculated by using FSW Welding. The samples were characterized by mechanical properties like tensile strength, impact strength, Vicker hardness and microstructure. The nominal chemical composition of AZ-91 magnesium alloy is 9% Aluminium (Al) and 1 % Zinc (Zn) and balance Mg. The FSW was carried out using CNC vertical milling machine .The optimum results by taguchi L9 method are carried out at a rotational speed of 500 RPM and feed is 50 mm/min with a cylindrical threaded tool was best to maximize the tensile strength and Observed that the 600 rpm, 70 mm/ min feed and cylindrical threaded was best to maximize the impact strength. The best to minimize the vicker hardness at rotational speed the 600 rpm and 60 mm/ min feed and taper threaded. Fine structure in the weld may be divided into three regions: fine re-crystallized grains around the weld center, the grains in the base metal highly elongated and pancake shaped and grain having great deformation in TMAZ. Compared with the BM, very fine grains were present in the SZ, due to dynamic recrystalization.
Authors and Affiliations
Naveen Kumar
Keywords
Related Articles
- EP ID EP138064
- DOI -
- Views 75
- Downloads 0
LDPC DECODING OF NAND FLASH MEMORY BY SOFT DECISION ERROR CORRECTION METHOD
The reliability of data stored in an high-density Flash memory devices tends to drop off rapidly because of the reduced cell size and multilevel cell technology. The Soft-decision error correction algorithms make...
A Survey on Radio Frequency Identification and Wireless Sensor Networks
RFID and WSN are most researched and rapidly emerging technology which provides wide range of applications and huge number of future potentials. RFID sensor technology is useful for tracking very large volumes of...
A REVIEW: IMPROVED NETWORK MONITORING AND ANALYSIS BY MULTICHANNEL PACKET-ANALYSIS SYSTEM (MPAS)
Today we are seeing that computer networks are increasing in their sizes very rapidly. Number of its user increased in past few years and traffic flows in networks also increased, so it’s very important to mon...
Design and Analysis of Routing Algorithm for 3D Network on Chip
Three dimensional network on chip (3D NoC ) is the most thriving on chip connection architecture. According to mesh on-chip conceive approach, investigator favors mesh conceive expertise to analyzed SOCs. That is...
SENSOR DEPLOYMENT ALGORITHM FOR HOLE DETECTION AND HEALING BY USING ENERGY BASED LOCAL HEALING
A wireless sensor network (WSN) are small sensors with limited computational and communication power. Each of which is small, lightweight and portable.They are very vulnerable to various type of failures.Senso...