EXPERIMENTAL STUDY ON BEHAVIOUR OF CONCRETE USING SELF CURING AGENTS
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 5, Issue 5
Abstract
Concrete is most widely used construction material due to its good compressive strength and durability. Depending upon the nature of work, the constituent materials; cement, fine aggregate, coarse aggregate and water are mixed in specific proportions to produce concrete. Concrete needs congenial atmosphere by providing moisture for a minimum period of 28 days for good hydration and to attain desired strength. Any laxity in curing will badly affect the strength and durability of concrete. Self-curing concrete is one of the special concretes in mitigating insufficient curing due to human negligence and inaccessibility of structures in difficult terrains. It increases water retention capacity of mix. Many studies are done about the usage of Self curing concrete. In the present study, the effect of admixture, Poly Ethylene Glycol (PEG) & Super Absorbent Polymer (SAP) are studied with proportions of PEG 0 - 2% and SAP 0-0.4% in M25 grade of concrete. Comparing both types of concrete with conventional concrete,the compressive, split tensile and flexural strength are found and optimum percentage of curing agent is determined.
Authors and Affiliations
M. Srihari
Corrosion Behaviour of Mild Steel in Acidic Medium in Presence of Aqueous Extract of Clitoria Ternatea Stem
The corrosion inhibitive action of flower extracts of clitoria ternatea stem on mild steel corrosion in 0.5 M H2SO4 solution was studied using weight loss method, potentiodynamic polarization and EIS measurements. The...
A REVIEW PAPER ON RECOGNIZE AUTOMATIC NUMBER PLATE AND BLURRED NUMBER PLATES
This review paper provides a brief survey on various recognition techniques for automatic number plate recognition (ANPR) in image processing. ANPR is real –time embedded system which uses number plate to identify...
Cellulose Extraction from Castor Shell
Cellulose extracted from biomass sources is considered the future feedstock for many products due to the availability and eco-friendly nature of cellulose. In this study, castor shell (CS) was evaluated as a poten...
TURBULENT CONVECTIVE HEAT TRANSFER OF GRAPHENE OXIDE NANOFLUID THROUGH HORIZONTAL TUBE
The aim of this paper is to study experimentally the forced convective heat transfer behaviour of Graphene oxide nanofluids inside a horizontal circular tube subject to a constant and uniform heat flux at the pipe wall....
OPTIMIZING THE PERFORMANCE OF THERMAL POWER PLANTS
Failure of boiler tubes has been a familiar phenomenon in power plants resulting in unscheduled plant shut down; in consequence, there are heavy losses in industrial production. The failure of boiler tubes appears...