Experimental study with different cathode and anode humidification temperatures in PEM fuel cell
Journal Title: International Journal of Modern Engineering Research (IJMER) - Year 2013, Vol 3, Issue 4
Abstract
The paper gives experimental study and analysis of PEM Fuel cell with different humidification temperature. The paper focuses on the effect on the voltage and power obtained from fuel cell under variable humidification temperatures. An experimental setup of PEM fuel cell has been developed for this study.The effects of different operating parameters on the performance of proton exchange membrane (PEM) fuel cell have been studied experimentally using pure hydrogen on the anode side and air on the cathode side. Experimental analysis has been done with different cathode and anode humidification temperatures. The experimental results are presented in the form of polarization curves, which show the effects of the various operating parameters on the performance of the PEM fuel cell. The possible mechanisms of the parameter effects and their interrelationships are discussed.
Authors and Affiliations
Babua Ram Sahu
Keywords
Related Articles
- EP ID EP98881
- DOI -
- Views 120
- Downloads 0
A Novel Data Leakage Detection
Abstract: This paper contains concept of data leakage, its causes of leakage and different techniques to detect the data leakage. The value of the data is incredible, so it should not be leaked or altered. In the f...
Finding Truth: Rendering Justice – A Myth or Reality
Abstract: The present family of Advocate’s profession is failing in its duty to understand the actual dispute involved in the case handled by them on the guise of defending their clients and the advocate’s are tota...
A Distributed Cut Detection Method for Wireless Sensor Networks
Wireless sensor networks (WSNs) consisting of large numbers of low- power and low- cost wireless nodes, have recently been employed in many applications: military surveillance, disaster response and medical care am...
Effect of process parameters on surface roughness during grinding of hot work steel AISI H11 under dry, wet and compressed gas environment
The major demands in machining of parts are closely controlling both geometrical accuracy and dimensional of engineering component made up of difficult to shape material is increasing continuously. Surface roug...
Mercury Removal Using Al – Al Electrodes by Electrocoagulation
ABSTRACT: The attempt has been made to remove mercury from mercury containing waste water prepared synthetically by using sodium chloride as an electrolyte using sacrificial aluminum anode in a batch wise by electrocoagu...