Mercury Removal Using Al – Al Electrodes by Electrocoagulation
Journal Title: International Journal of Modern Engineering Research (IJMER) - Year 2013, Vol 3, Issue 1
Abstract
ABSTRACT: The attempt has been made to remove mercury from mercury containing waste water prepared synthetically by using sodium chloride as an electrolyte using sacrificial aluminum anode in a batch wise by electrocoagulation cell. The affect of applied potential, initial pH, initial concentration of solution, agitation, electrolyte concentration and energy consumption on percent removal of mercury have been investigated. The removal efficiency of mercury was achieved 98.5% under optimum condition in which solution pH was 4.5, applied potential 9 V, initial solution concentration 50 ppm, electrolyte concentration 1.333 g/ lit. With a stirring speed 400 rpm.
Authors and Affiliations
Satish I. Chaturvedi
Keywords
Related Articles
- EP ID EP156568
- DOI -
- Views 106
- Downloads 0
Application of Taguchi Parametric Technique for the Decrease in Productivity Loss (In Percentage) In an Industry
Now a day, working in industry is not as comfortable as in earlier times. The man power is decreasing day by day and new recruitment is not in same ratio as the persons leaving industries. This is turn increase the...
Efficient Implementation of Low Power 2-D DCT Architecture
This Research paper includes designing a area efficient and low error Discrete Cosine Transform. This area efficient and low error DCT is obtained by using shifters and adders in place of multipliers. The main tech...
Helicopter Flapping Under Dynamic Stall
A helicopter is an aircraft that is lifted and propelled by one or more horizontal rotors, each consisting of two or more rotor blades. The main objective of this seminar topic is to study the basic concepts of helicopte...
Tensile and Flexural Properties of Sisal/Jute Hybrid Natural Fiber Composites
During the last two decades using natural fiber as reinforcement in polymers has increased drastically. The present research work has been carried out to make use of sisal/jute natural fibers. The aim of this paper...
Experimental Method to Analyse Limit Load in Pressure Vessel
Pressure vessel contains with different inlet & outlet openings called nozzle or valves. The design parameter of these valves may different in one pressure vessel. These valves cause geometric discontinuity of the...