Fatigue crack growth behavior under multiaxial variable amplitude loading
Journal Title: Frattura ed Integrità Strutturale - Year 2016, Vol 10, Issue 37
Abstract
This study compares both uniaxial and multiaxial variable amplitude experimental crack growth data for naturally initiated fatigue cracks in tubular specimens of 2024-T3 aluminum alloy to predictions based on two state-of-the-art analysis codes: UniGrow and FASTRAN. For variable amplitude fatigue tests performed under pure axial nominal loading conditions, both UniGrow and FASTRAN analyses were found to produce mostly conservative growth life predictions, despite good agreement with constant amplitude crack growth data. For variable amplitude torsion and combined axial-torsion crack growth analyses, however, the conservatism in growth life predictions was found to reduce. This was attributed to multiaxial nominal stress state effects, such as T-stress and mixed-mode crack growth, which are not accounted for in either UniGrow or FASTRAN, but were found in constant amplitude fatigue tests to increase experimental crack growth rates. Since cracks in this study were initiated naturally, different initial crack geometry assumptions were also investigated in the analyses.
Authors and Affiliations
Nicholas Gates, Ali Fatemi, Nagaraja Iyyer, Nam Phan
Keywords
Related Articles
- EP ID EP101612
- DOI 10.3221/IGF-ESIS.37.23
- Views 47
- Downloads 0
Propagazione di fratture longitudinali in gasdotti caratterizzati da bassa duttilità
Il presente lavoro propone l’analisi di propagazione di una frattura fragile longitudinale di un gasdotto interrato basata sulla valutazione dell’energy release rate. Viene illustrata l’implementazione della sudd...
Estimate of compressive strength of an unidirectional compositelamina using cross-ply and angle-ply laminates
In this work has been estimated the compressive strength of a unidirectional lamina of acarbon/epoxy composite material, using the cross-ply and angle-ply laminates.Over the years various methods have been develope...
A probabilistic interpretation of the Miner number for fatigue life prediction
The Miner number M, used as a tool for lifetime prediction of mechanical and structural components in most of the standards related to fatigue design, is generally accepted as representing a damage stage resultin...
Evaluation of seismic mitigation of embankment model
Conducting experiment on embankment model by shaking table could be an accurate method to evaluate the behavior of embankment or any structures under seismic loading. In this research work, in order to assess the functi...
Liquefaction mathematical analysis for improvement structures stability
The stability of any structure is possible if foundation is appropriately designed. The Bandar abbas is the largest and most important port of Iran, with high seismicity and occurring strong earthquakes in this territory...