Impact response of balsa core sandwiches
Journal Title: Frattura ed Integrità Strutturale - Year 2014, Vol 8, Issue 30
Abstract
The benefits of resins nano-enhanced on the impact response of sandwich composites made by fiber glass/epoxy skins and balsa wood core were studied. Afterwards, the influence of the core's discontinuity was analyzed in terms of impact strength. For better dispersion and interface adhesion matrix/clay nanoclays were previously subjected to a silane treatment appropriate to the epoxy resin. Resins enhanced by nanoclays promote higher maximum impact loads, lower displacements and the best performance in terms of elastic recuperation. The core's discontinuity decreases the impact strength, but the resin enhanced by nanoclays promotes significant benefits.
Authors and Affiliations
Nurdane Mortas, Paulo Reis, José Ferreira
Fatigue crack growth of aluminium alloy 7075-T651 under non-proportional mixed mode I and II loads
This study aims to investigate fatigue growth behaviour in AA7075-T651 under non-proportional mixed mode I and II loads. Fatigue tests were performed under cyclic tension and torsion using a thin-walled tubular sp...
Development of a formalism of movable cellular automaton method for numerical modeling of fracture of heterogeneous elastic-plastic materials
A general approach to realization of models of elasticity, plasticity and fracture of heterogeneous materials within the framework of particle-based numerical methods is proposed in the paper. It is based on building man...
Integrated structure for a resonant micro-gyroscope andaccelerometer
This paper presents the study of the mechanical behavior of a microstructure designed to detectacceleration and angular velocity simultaneously. The new resonant micro-sensor proposed, fabricated by theThELMA© surf...
Effect of inhomogeneous distribution of non-metallic inclusions on crack path deflection in G42CrMo4 steel at different loading rates
An inhomogeneous distribution of non-metallic inclusions can result from the steel casting process. The aim of the present study was to investigate the damaging effect of an inhomogeneous distribution of nonmetall...
High-cycle notch sensitivity of alloy steel ASTM A743 CA6NM used in hydrogenator turbine components
The presence of notches and other stress concentrations in turbine blades and other notch hydraulic components is a current problem in engineering. It causes a reduction of endurance limit of material. In that sense, spe...