INFLUENCE OF WELDING SPEED AND GROOVE ANGLE ON STRENGTH OF V-GROOVE BUTT WELD JOINT USING TIG WELDING
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 5, Issue 4
Abstract
Welding is the metal joining process in which two or more metal having same material or different can be joined by heating to a plastic state .It is mostly used for joining metals in process industry, in fabrication, maintenance, repair of parts and structures. The metal plates and pipes used in process industry and they have welding strength as their important parameter. In this paper study of welding speed and geometry to find out tensile and impact strength in case of butt weld joint will be done. For V-groove geometry different models of plate with various included angles from 300 , 400 , 500 will be made from structural steel (A633 Grade E). Currently different welding speeds are used in precision welding applications such as nuclear reactor pressure vessels, boilers etc. where welding accuracy as well as quality with strength is an important parameter. So in this project experimentation will be done on different welding speed such as 0.3 cm/sec, 0.6 cm/sec and 0.9cm/sec to prepare a V-groove butt weld joint. Generally the Vgroove geometry with included angle up to 600 is in use. After studying the Indian Welding Journal published by Indian Welding Society it is observed that distortion and residual stresses increase with increase in groove angle . Joints strength also increases with groove angle increase of the welded material which affects the economy of welding. The industries facing problems related to strength, the V-groove geometry can make use of the satisfactory results obtained from this investigation.
Authors and Affiliations
Mrs. Sanap Deepali *
Keywords
Related Articles
- EP ID EP123039
- DOI 10.5281/zenodo.49697
- Views 58
- Downloads 0
Finite Element Analysis of Helical Gear Using Three-Dimensional Cad Model
Gears are one of the most critical components in mechanical power transmission systems. The bending and surface strength of the gear tooth are considered to be one of the main contributors for the failure of the g...
A REVIEW OF GENETIC ALGORITHMS AND ITS APPLICATIONS IN CHEMICAL ENGINEERING RESEARCH
This paper presents a review of Genetic Algorithms (GAs) and its applications within the field of Chemical Engineering. The primary applications of GAs in Chemical Engineering date back to the 1970s, and within th...
EVALUATION INDEX SYSTEM FOR PERFORMANCE EVALUATION OF ECOINDUSTRIAL THERMAL POWER PLANTS BY USING FUZZY DELPHI METHOD
In order to promote the clean and sustainable production of coal resources, more and more eco-industrial thermal power plants (ETPPs) are established in China. Considering it is a burgeoning industry, the perf...
Horizontal Well Performance in Thin Oil Rim Reservoirs
A horizontal well in a thin oil rim was simulated using Eclipse100 to ascertain the effect of different lengths of the horizontal section of the well and oil production rates on oil recovery efficiency. Five different s...
An Elegant Approach for Diagnosis of Parkinson's disease on MRI Brain Images by Means of a Neural Network
Early diagnosis of Parkinson's disease (PD) is of immense importance, since clinical symptoms do not occur until substantial parts of the substantia nigra(SN) neurons in the brain stem have been irreparably damage...