Modelling of ultrasonic impact treatment (UIT) of welded joints and its effect on fatigue strength
Journal Title: Frattura ed Integrità Strutturale - Year 2015, Vol 9, Issue 34
Abstract
Ultrasonic impact treatment (UIT) is a remarkable post-weld technique applying mechanical impacts in combination with ultrasound into the welded joints. In the present work, a 3D simulation method including welding simulation, numerical modelling of UIT-process and an evaluation of fatigue crack growth has been developed. In the FE model, the actual treatment conditions and local mechanical characteristics due to acoustic softening are set as input parameters. The plastic deformation and compressive stress layer are found to be more pronounced when acoustic softening takes place. The predicted internal residual stress distributions of welded joint before and after UIT are compared with experimental results, showing a fairly good agreement with each other. Finally, simulated results of fatigue crack growth in various residual stress fields are well compared with test results, so that the proposed model may provide an effective tool to simulate UIT-process in engineering structures.
Authors and Affiliations
K. Yuan, Y. Sumi
Keywords
Related Articles
- EP ID EP106673
- DOI 10.3221/IGF-ESIS.34.53
- Views 48
- Downloads 0
Tests in tension-torsion conditions with descending sections of strain curve construction
The paper is devoted to theoretical and experimental investigation of materials behavior on postcritical deformation stage (strain softening). Tests results, which confirm theoretical justification of specimen conf...
Numerical modelling of reinforced concrete beams with fracture-plastic material
This paper describes the use of models of fracture-plastic materials for reinforced concrete in numerical modelling of beams made from reinforced concrete. The purpose of the paper is to use of a model of concret...
Rilievo in tempo reale di difetti superficiali su corpi in movimento a velocità elevata con ultrasuoni senza contatto
Il rilievo di difetti superficiali durante le ispezioni periodiche è importante poiché in genere le sollecitazioni sono maggiori in superficie e possono accelerare la crescita delle discontinuità. I difetti superfi...
Numerical study of the response of dynamic parameters to defects in composite structures
The purpose of this work is to study three different models of delamination in composite plate (the free mode model, the constrained model and the contact model) and applicability of this models to the vibrational...
Surface crack growth subject to bending and biaxial tension-compression
Fatigue surface crack growth and the in-plane and out-of-plane constraint effects are studied through experiments and computations for aluminium alloy D16T. Subjects for studies are cruciform specimens under...