Tests in tension-torsion conditions with descending sections of strain curve construction
Journal Title: Frattura ed Integrità Strutturale - Year 2013, Vol 7, Issue 24
Abstract
The paper is devoted to theoretical and experimental investigation of materials behavior on postcritical deformation stage (strain softening). Tests results, which confirm theoretical justification of specimen configuration impact on the possibility of creating descending sections of strain curve, are given. It is shown that, with sufficient stiffness of loading system, equilibrium postcritical deformation of materials is possible. It is confirmed in uniaxial tension tests with unloading on postcritical deformation stage. Test results on tension with torsion of thin-walled tubular specimens in strain softening conditions are adduced.
Authors and Affiliations
M. P. Tretiakov, V. E. Vildeman
Keywords
Related Articles
- EP ID EP161645
- DOI 10.3221/IGF-ESIS.24.10
- Views 74
- Downloads 0
Fatigue crack paths and properties in A356-T6 aluminum alloy microstructurally modified by friction stir processing under different conditions
A356-T6 cast aluminum alloy is a light weight structural material, but fatigue crack initiates and propagates from a casting defect leading to final fracture. Thus it is important to eliminate casting defects. In&...
3D-mixed-mode-loading: material characteristic values and criteria’s validity
In many structures and components cracks, which are exposed to a 3D-mixed-mode-loading, occur due to multiaxial loading situation. A reliable evaluation of those components requires fracture mechanical criteria v...
Multi-purpose fatigue sensor. Part 2. Physical backgrounds for damages accumulation and parameters of their assessment
The characteristic informative parameters for defect detection to be used in fatigue sensors have been established. Their development is interpreted in terms of scale levels of deformation and fracture. Damage acc...
On the notch sensitivity of cast iron under multi-axial fatigue loading
This work deals with the notch sensitivity of sharp notches under multi-axial fatigue loading. The main discussion concerns the differences in notch sensitivity at high cycle fatigue regime, between tensile, tors...
Mixed methods for viscoelastodynamics and topology optimization
A truly-mixed approach for the analysis of viscoelastic structures and continua is presented. Anadditive decomposition of the stress state into a viscoelastic part and a purely elastic one is introduced alongwith a...