Modelling the mechanical behaviour of metal powder during Die compaction process
Journal Title: Frattura ed Integrità Strutturale - Year 2016, Vol 10, Issue 37
Abstract
In this work, powder compaction process was investigated by using a numerical material model, which involves Mohr-Coulomb theory and an elliptical surface plasticity model. An effective algorithm was developed and implemented in the ANSYS finite element (FEM) code by using the subroutine USERMAT. Some simulations were performed to validate the proposed metal powder material model. The interaction between metal powder and die walls was considered by means of contact elements. In addition to the analysis of metal powder behaviour during compaction, the actions transmitted to die were also investigated, by considering different friction coefficients. This information is particularly useful for a correct die design.
Authors and Affiliations
G. Cricrì, M. Perrella
Crack formation of steel reinforced concrete structure under stress in construction period
To obtain deformation rules of steel reinforced concrete structure under stress, this study explored the crack formation in construction period. A novel structure system – steel reinforced concrete structure with&...
Measurement and simulation of crack growth rate and direction under non-proportional loadings
A series of fatigue experiments on thin-walled tubes under tension and torsion, the experimental results – crack path and crack growth life – are measured and compared. It is observed that the cracks follow a ...
Experimental analysis of crack evolution in concrete by the acoustic emission technique
The fracture process zone (FPZ) was investigated on unnotched and notched beams with different notch depths. Three point bending tests were realized on plain concrete under crack mouth opening displacement (CMOD)...
Influence of control parameters on the crack paths in the aluminum alloy 2024 under bending
The paper presents development of crack paths in aluminium alloy 2024. Fatigue tests were carried out for specimens with rectangular cross-section. The specimens were put to bending at controlled energy param...
Acoustic emission characteristics of instability process of a rock plate under concentrated loading
It can facilitate the understanding of the mechanical properties and failure laws of rocks to research on the rock failure mechanism and evolution characteristics of Acoustic Emission (AE). Under the concentrated...