Monthly Monitoring Of Some Physico-Chemical Parameters in Domestic Wastewater Treatment Plant in Turkey: A Case Study On Selected Plant
Journal Title: International Journal of Modern Engineering Research (IJMER) - Year 2014, Vol 4, Issue 5
Abstract
In this paper, monitoring of some parameters in wastewater from domestic wastewater treatment plant is evaluated. The wastewater from the selected plant is characterized by COD, BOD5, pH, TSS. The wastewater samples were collected from the inlet and outlet to monthly from a wastewater treatment plant to the city of Yozgat in Turkey for eight months from May 2013 to December 2013. Results of a detailed survey on the performance of a selected plant was given both in terms of influent and effluent quality and in comparision with the current legislation on discharge limits to receiving waters. The results of effluent showed that the values of these parameters are ranged on average between 16,7 and 27,2 mg/L for biological oxygen demand (BOD5), between 22,3 and 36,2 mg/L for chemical oxigen demand and between <10 and 21 total suspanded solid. All these values are beyond World Health Organization and Turkish Standards recommendations for wastewater discharge.
Authors and Affiliations
Serpil SAVCI1 , Ayça DURAK2
Keywords
Related Articles
- EP ID EP157849
- DOI -
- Views 95
- Downloads 0
Experimental Investigation on Heat Transfer Analysis in a Cross flow Heat Exchanger with Waved Baffle Plates by using FLOEFD
Heat exchanger is devices used to exchange the heat between two liquids that are at different temperature .These are used as a reheated in many industries and auto mobile sector and power plants. The main aim o...
Experimental Study of the Parameters Affecting the Tribological Performance of Nano Lubricant Containing Multi-Walled Carbon Nano-tubes (MWCNT) using Design of Experiments (DOE)
The Multi-Walled Carbon Nano-Tubes (MWCNT) are gaining wide acceptability as an anti-wear lubricant additive because of their extraordinary tribological properties. However, full antiwear potential of the MWCNT...
Applying Classification Technique using DID3 Algorithm to improve Decision Support System under Uncertain Situations[b][/b]
Decision Support System (DSS) is equivalent synonym as management information systems (MIS). Most of imported data are being used in solutions like data mining (DM). Decision supporting systems include also decisio...
Effect of SC5D Additive on the Performance and Emission Characteristics of CI Engine
In this experimental work polymer based additive are mixed in different proportions with diesel fuel. Their emissions and performance results are compared with base fuel diesel. By mixing of this additive, it is ob...
“Design and Analysis of Composite Drive Shaft using ANSYS and Genetic Algorithm” A Critical Review
Abstract: This study deals with the review of optimization of drive shaft using the Genetic Algorithm and ANSYS. Substitution of composite material over the conventional steel material for drive shaft has increasi...