Effect of SC5D Additive on the Performance and Emission Characteristics of CI Engine
Journal Title: International Journal of Modern Engineering Research (IJMER) - Year 2013, Vol 3, Issue 5
Abstract
In this experimental work polymer based additive are mixed in different proportions with diesel fuel. Their emissions and performance results are compared with base fuel diesel. By mixing of this additive, it is observed that cetane index number is increased from 46.22 as of base fuel to 47.63, 49.40, 51.91, 54.91 and 60.66 respectively. The tests conducted at full load and varying speed conditions. The results show that HC, CO& NOX emissions are reduced by 35%, 30% & 4% respectively. Brake power is increased 6% whereas brake specific fuel consumption and smoke density are decreased by 23% and 35%. Here we also observed that, when cetane index number is increases from 54.91 to 60.66 the engine performance and emission characteristics are not effective.
Authors and Affiliations
Samarjeet Bagri
Keywords
Related Articles
- EP ID EP136137
- DOI -
- Views 95
- Downloads 0
Performance and Emissions Analysis Using Diesel and Tsome Blends
The present study covers the various aspects of biodiesels fuel derived from crude Tobacco oil and performance emissions study on four stroke compression ignition engine with Tobacco seed oil. Crude Tobacco oil is...
Consequence of Corrosion on Dynamic Behaviour of Steel Bridge Members
Deterioration of steel bridge infrastructures constitutes a major worldwide problem in transportation engineering and maintenance management industry. Corrosion and fatigue cracking may be the two most important ty...
A Detailed Review on Artificial Roughness Geometries for Optimizing Thermo-Hydraulic Performance of Solar Air Heater
It is well known fact that the heat transfer coefficient between the absorber surface of solar air collector & flowing fluid i.e. air can be improved by providing artificial roughness geometry on heat trans...
Static Analysis of Go-Kart Chassis by Analytical and Solid Works Simulation
This paper aims to do modelling, simulation and performing the static analysis of a go kart chassis consisting of Circular beams. Modelling, simulations and analysis are performed using 3-D modelling software...
Study of Failure Modes of Rolling Bearings: A Review
In an industry, the failure of bearingis one of the main causes responsible for machiningbreakdowns.Rollingbearingsconsist of bearing rings, rollingelements and cages for the support of rollingelements. Bearing life...