Multiple Optimization of Wire EDM Machining Parameters Using Grey Based Taguchi Method for Material HCHCR
Journal Title: International Journal of Modern Engineering Research (IJMER) - Year 2014, Vol 4, Issue 2
Abstract
Wire EDM is a non conventional machining process, which is used when the precision is prime importance. Multiple optimization (Grey based Taguchi) technique is used to find out the optimum machining setup for input parameter. This paper investigate the optimal set of process parameter such as Ton, Toff, Wp, Wf in wire EDM machining process to find out the variation in two output parameter such as material removal rate (MRR), and surface roughness (Ra) on material high chromium high carbon steel (HCHCr) using wire Brass/super alloy (coated).Experimentation was conducted on orthogonal array L-9 based on DOE. Analysis of experiment has been carried out using GRA. All the experimental data are fed into Minitab software, through which various tables, graphs & optimum values are obtained. The experimental result reveals that the optimum setting of input parameters significantly improves Wire EDM process.
Authors and Affiliations
Anwarul Haque
Keywords
Related Articles
- EP ID EP94021
- DOI -
- Views 109
- Downloads 0
XML Based Reverse Engineering System
Abstract: Reverse engineering that gets data such as an original document or design technique by tracing reversely from certain software system is required in the sides of maintenance and reuse. This paper describe...
Review on Adsorption Refrigeration System
Energy can neither be created nor be destroyed”- first law of thermodynamics. the energy potential of the world is constant , so we have to save the energy as much as possible .as the refrigeration is needed ev...
Design and Analysis Special Shaped Milling Cutter Using Finite Element Analysis
Milling is a production process which is based on material removal using multipoint cutting tools, as a result higher material removal rates can be achieved along with high surface finish. The common operations performed...
Fatigue Analysis of Acetylene converter reactor
The structural integrity of mechanical components during several transients should be assured in the design stage. This requires a fatigue analysis including thermal and structural analysis. As an example, this study per...
Impact of the Hydrographic Changing in the Open Drains Cross Sections on the Hydraulic Efficiency of Open Drains
Drained water is collected through 16000 km of open drains spread all over Egypt. Therefore, drains hydraulic problems lead to reduce their efficiency and ability to the free drainage of cultivated land. The work...