On fatigue behaviour of two spring steels. Part II: Mathematical models
Journal Title: Frattura ed Integrità Strutturale - Year 2016, Vol 10, Issue 37
Abstract
Symmetric fatigue in two spring steels is investigated in three groups of specimens. One of the groups (Steel EN10270-1SH/ DIN 17223C – C 0.82%, Mn 0.76%, Si 0.26%) has experienced rotating-bending fatigue in air, and the other two groups (Steel BS250A53/ DIN 55Si7 – C 0.56%, Mn 0.81%, Si 1.85%), torsion fatigue in-air and corrosion environment. All experiments include testing to fracture, applying acetate-foil replication technique, replica monitoring of short crack surface growth, length measuring of propagating cracks, a, at the corresponding number of fatigue cycles, N. Data obtained from replica monitoring are presented in plots “Crack lengths, a – Cycles, N”, and used for calculating fatigue crack growth rates, da/dN, and graphical presentations “Crack growth rates, da/dN – Crack lengths, a”. A mathematical description of da/dN – a is presented by introducing a parabolic-linear model in different versions for each of the steels. The model versions are verified through comparing the experimental fatigue lifetimes with those calculated by the proposed model version.
Authors and Affiliations
D. Angelova, R. Yordanova, T. Lazarova, S. Yankova
Keywords
Related Articles
- EP ID EP107081
- DOI 10.3221/IGF-ESIS.37.34
- Views 63
- Downloads 0
Very high cycle fatigue strength and crack growth of thin steel sheets
For basic observations or for industrial applications it is of interest to use flat specimens at very high frequency in the gigacycle regime. In this work, thin flat sheet, with 1.2 mm thickness of a complex phase...
Multiaxial fatigue crack path prediction using critical plane concept
Prediction of fatigue crack orientation can be an essential step for estimating fatigue crack path. Critical plane concept is widely used due to its physical basis that fatigue failure is associated with certain&n...
Role of the microstructure on the mechanical properties of fully pearlitic eutectoid steels
This paper analyses how the microstructure of an eutectoid pearlitic steel affects its conventional mechanical properties (obtained by means of a standard tension test) and the associated micromechanisms of fract...
Crack paths in smooth and precracked specimens subjected to multiaxial cyclic stressing
The understanding of shear-mode crack growth mechanisms and crack branching phenomena is of great interest for a variety of practical engineering situations. Despite this fact, relatively little research is a...
Fracture failure analysis of baseplates in a fluidic amplifier made of WC-11Co cemented carbide
A fluidic amplifier is a crucial automatic control component in a liquid jet hammer used to drill hard formations in the oil industry. This study aims to determine the true causes of the fracture failure of basepla...