Parametric Analysis of Process Parameters of Laser Cutting Machine( Mazak Hyper Gear 510 ) By Using Anova Method On SS 304
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 3, Issue 4
Abstract
Laser cutting is mostly a thermal process in which a focused laser beam is used to melt material in a localized area. A co-axial gas jet is used to eject the molten material from the cut and leave a clean edge. A continuous cut is produced by moving the laser beam or work piece and leave a clean edge. A particular characteristic of a laser cut is the formation of striations on the cut edge. These striations play an important part in laser cutting as they effectively control the edge roughness. Laser Beam Machining is widely used manufacturing technique utilized to perform cutting, engraving and welding operations on a wide variety of materials ranging from metals to plastics. In the present work an attempt has been made to study the effect of process parameters such as feed rate, input power and standoff distance on the quality of the machined surface using laser beam on mild steel and stainless steel. The quality of cut is assessed in terms of response parameters such as upper kerf width, lower kerfs width, taper of the cut surface and surface roughness. Design of experiments is implemented by using a full factorial design. The effect of the process parameters on response have been shown by means of main effect plots developed using ANOVA analysis. After Design of Experiment (DOE) by using full factorial method, the analysis will be carry by the ANalysis of VArience (ANOVA) method.
Authors and Affiliations
Umang V Patel
Keywords
Related Articles
- EP ID EP100841
- DOI -
- Views 90
- Downloads 0
EFFECT OF CAFFEINE ON BACILLUS CEREUS
The research work presented in this paper is Effect on caffeine on the growth of Staphylococcus aureus microorganism. Caffeine is a plant alkaloid which are found in more than 60 plant species just like coffia ara...
Electricity Generation in Double Chamber Microbial Fuel Cell with different Salts Concentration
Microbial fuel cell ( MFC ) represents a new method for electricity generation. Microbial fuel cells are devices that can use bacterial metabolism to produce an electric potential from a wide range organic substra...
HIGH TEMPERATURE AND HIGH STRAIN RATE SUPERPLASTIC DEEP DRAWING PROCESS FOR AA5049 ALLOY CYLINDRICAL CUPS
In this present work, the formability of high temperature and high strain rate deep drawing process were estimated for the cylindrical cups using Taguchi technique and finite element analysis. The process paramete...
IMPLEMENTATION OF LOW POWER AND LESS AREA BOOTH MULTIPLIER
Multiplication in hardware can be implemented in two ways either by using more hardware for achieving fast execution or by using less hardware and end up with slow execution. The area and power of the multiplier is...
Finite Element Method Based Analysis into Rotary Forging of AXI-Symmetric Aluminium Disc
The present economic situation in the world has been driving the forging industry even at more competitive environment. Finite element simulation became an important tool in the forging industries because of avail...