Quality Control system for a hot-rolled metal surface
Journal Title: Frattura ed Integrità Strutturale - Year 2016, Vol 10, Issue 37
Abstract
The modern ideas about of quality of products are based on the principle of the absolute satisfaction of requirements of recommendations of the buyer. A presence of surface defects of steel-smelting and rolling origin is peculiar to the production of hot-rolling mill. The automatic surface inspection system (ASIS) includes two digital line video cameras for the filming of the upper and lower surfaces of the flat bar, block of illumination of the upper and lower surfaces of the flat bar, computer equipment. A system that secures 100 % control of the surface of rolled metal (of the upper and lower side) detects automatically and classifies the sheet defects in the real time mode was mounted in the domestic practice in the first time in 2003 on hot rolling mill 2000 JSC «Novolipetsk Iron & Steel Corporation» (NISC). The whole assortment of the mill 2000 was divided for the five groups by the outward appearance of the surface. The works on the identification of defects of hot-rolled metal and widening of data base of knowledge of ASIS were continued after the carrying out of guarantee tests. More than 10 thousand images of defects were added to the data base during the year.
Authors and Affiliations
I. Mazur, T. Koinov
Keywords
Related Articles
- EP ID EP112474
- DOI 10.3221/IGF-ESIS.37.38
- Views 47
- Downloads 0
Some practical crack path examples
It is well known that many engineering structures and components, as well as consumer items, contain cracks or crack-like flaws. It is widely recognised that crack growth must be considered both in design and in...
High-cycle fatigue strength of a pultruded composite material
Dealing with composites in polymeric matrix, the pultruded ones are among the more suitable for large production rates and volumes. For this reason, their use is increasing also in structural applications in civil and...
Understanding the edge crack phenomenon in ceramic laminates
Layered ceramic materials (also referred to as “ceramic laminates”) are becoming one of the most promising areas of materials technology aiming to improve the brittle behavior of bulk ceramics. The utilization&nbs...
Some experimental observations of crack-tip mechanics with displacement data
In the past two decades, crack-tip mechanics has been increasingly studied with full-field techniques. Within these techniques, Digital Image Correlation (DIC) has been most widely used due to its many advantages...
Fatigue crack growth under remote and local compression – a state-of-the-art review
There is an ever increasing need for accurate understanding of the fatigue crack growth behaviour in major engineering materials and components. With the move towards more complex, probabilistic assessments, the...