Re-Refining Recovery Methods of Used Lubricating Oil
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 3, Issue 3
Abstract
Used lubricating oil (ULO) is any petroleum based or synthetic oil that has been used and during operation oil losses effectiveness due to the presence of certain contaminants from air, fuel combustion, oxidation and additives. Thus, decreases the oil quality gradually to a level that the used oil should be replaced by a new one, in order to maintain the engines in good condition, it is necessary that the engine oil must be replaced by new oil after certain period of service. Waste oil creates environmental pollution if not disposed-off properly. This article describes one of the best methods of used oil re-refining and compares its product specifications with those of virgin base oil.
Authors and Affiliations
Hassan Ali Durrani
Keywords
Related Articles
- EP ID EP117197
- DOI -
- Views 61
- Downloads 0
SIMULATION & DESIGN OF TOUCH TONE DIAL TELEPHONE (DTMF 8870) CHIP IN HDL ENVIRONMENT
The communication switching system enables the universal connectivity. The universal connectivity is realized when any entity in one part of the world can communicate with any other entity in another part of the world....
A REVIEW PAPER ON AN ENHANCED FACE RECOGNITION SYSTEM USING CORRELATION METHOD AND ABPSO
Face Recognition is one of the problems which can be handled very well using Hybrid techniques or mixed transform rather than single technique. This paper deals with using of Particle Swarm Optimization techniques for Fa...
PAYROLL MANAGMENT SYSTEM
Payroll Management System document formally defines about the requirements to the new proposed of theory & it also briefly state about the functional and non-functional requirements. At the same time it includes tha...
Design Round Robin and Interleaving Arbitration algorithm for NOC
NOCs (Network on Chip) are increasing in popularity because of their advantages: larger bandwidth, and lower power dissipation through shorter wire segments. Communications in large SOCs are so important that many...
Speed Control and THD for Three Phase Induction Motor Using Simulink
Sinusoidal Pulse Width Modulation variable speed drives are increasingly applied in many new industrial applications that require superior performance. Be it domestic application or industry, motion control is req...