Specimen thickness effect on elastic-plastic constraint parameter A
Journal Title: Frattura ed Integrità Strutturale - Year 2015, Vol 9, Issue 33
Abstract
Three-dimensional elastic-plastic problems for a power-law hardening material are solved using the finite element method. Distributions of the J-integral and constraint parameter A along the crack front for varying specimen thickness and crack depth are determined for edge cracked plate, center cracked plate, three point bend and compact tension specimens. The constraint parameter A is a measure of stress field deviation from the HRR field. Higher A values signify lower specimen constraint. Results of finite element analyses show that the constraint parameter A significantly decreases when specimen thickness changes from 0.1 to 0.5 of the specimen width. Then it has more or less stable value. Among four specimen the highest constraint is demonstrated by the compact tension specimen which has the constraint parameter A lower than its small scale yielding value.
Authors and Affiliations
G. Nikishkov, Yu. Matvienko
Keywords
Related Articles
- EP ID EP122206
- DOI 10.3221/IGF-ESIS.33.10
- Views 49
- Downloads 0
Designing aluminium friction stir welded joints against multiaxial fatigue
The present paper investigates the accuracy of the Modified Wöhler Curve Method (MWCM) in estimating multiaxial fatigue strength of aluminium friction stir (FS) welded joints. Having developed a bespoke joini...
Development of a formalism of movable cellular automaton method for numerical modeling of fracture of heterogeneous elastic-plastic materials
A general approach to realization of models of elasticity, plasticity and fracture of heterogeneous materials within the framework of particle-based numerical methods is proposed in the paper. It is based on building man...
High-cycle notch sensitivity of alloy steel ASTM A743 CA6NM used in hydrogenator turbine components
The presence of notches and other stress concentrations in turbine blades and other notch hydraulic components is a current problem in engineering. It causes a reduction of endurance limit of material. In that sense, spe...
3D Analyses of crack propagation in torsion
The initiation and propagation of fatigue cracks during cyclic torsion loading was studied in a cast Al alloy (A357) with a relatively large (~500 μm) grain size. 2D observations, revealed that multi site crack i...
A study of the stored energy in titanium under deformation and failure using infrared data
The work is devoted to the experimental study of heat dissipation caused by plastic deformation and failure processes taking place in a titanium alloy Ti-4.2Al-1.6Mn. To investigate the spatial and time evolution o...