Study of short cracks under biaxial fatigue
Journal Title: Frattura ed Integrità Strutturale - Year 2014, Vol 8, Issue 30
Abstract
In this paper a methodology for evaluating crack initiation under biaxial conditions is presented. The methodology consists of evaluating the crack length automatically with digital processing of highmagnification images of the crack. The methodology was applied to study five different strain conditions on a low carbon ferritic-pearlitic steel specimen with tubular shape. A hole of 150 μm diameter was drilled to enforce the crack to initiate at a particular spot. Different combinations of axial and torsional strains were analysed during the initiation stage of the crack. The setup employed allowed detection of the crack to within 6 μm from the edge of the hole on average and monitoring of the crack during early stages. Fatigue crack propagation curves clearly showed oscillations due to microstructure. It was also observed that these oscillations decreased as the torsional component of the strain was increased.
Authors and Affiliations
P. Lopez-Crespo, B. Moreno, A. Garcia-Gonzalez, J. Zapatero
Keywords
Related Articles
- EP ID EP121666
- DOI -
- Views 67
- Downloads 0
Characterization of fracture properties of thin aluminum inclusions embedded in anisotropic laminate composites
The fracture properties of thin aluminum inclusions embedded in anisotropic paperboard composites, of interest for food and beverage packaging industry, can be determined by performing tensile tests on non-conventi...
Measurement and analysis of fatigue crack deformation on the macro- and micro-scale
The paper describes an experiment which performs in-situ loading of a small compact tension specimen in a scanning electron microscope. Images are collected throughout a number of successive loadincg cycles...
Effect of centrifugal load on crack path in thin-rimmed and webbed gears
Thin rimmed and webbed gears are used in particular applications to reduce systems weight. This kind of gears need an accurate and fail safe design. As a matter of fact, a possible failure, due to bending fatigue,...
A new method for the experimental study of fatigue behaviour of thermoplastic materials
Nowadays most industrial realities undergo a strong push to improve cost-effectiveness, productivity and quality of manufactured products. In particular we focussed our attention in the area of design of plastic structur...
Fatigue life prediction of pedicle screw for spinal surgery
This paper is dedicated to fatigue estimation of implants for spinal surgery. This article deals especially with special case of hollow pedicle screw. Implant systems utilizing specially designed spinal instr...