Thermoelectric Energy Conversion by Rankine Bottoming Cycle Technique: An Approach towards Waste Heat Recovery from IC Engine
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 3, Issue 5
Abstract
Now a days, the worldwide problem regarding rapid economy development and also shortage of energy, the exhausted waste heat from internal combustion engine and environmental pollution has been more emphasized heavily. In an IC engine, approximately, 30 to 40% of the total heat supplied to the engine in the form of fuel is converted into useful mechanical work; out the remaining heat is rejected to the atmosphere through exhaust gases and engine cooling systems, so it is required to utilized waste heat into useful work. The utilization of this waste heat not only conserves fuel but also reduces the amount of waste heat and greenhouse gases harmed to surrounding atmosphere. The study shows the availability of waste heat from internal combustion engine. Possible methods to recover this waste heat from internal combustion engine discussed, in current study, is through the Rankine bottoming cycle operating by low grade waste heat exhausted from diesel powered internal combustion engine.
Authors and Affiliations
Aqib Khan*1
Keywords
Related Articles
- EP ID EP153476
- DOI -
- Views 94
- Downloads 0
Simulation of Regulated Power Supply for Solar Photo-Voltaic Model
This paper presents the simulation of regulated DC voltage source. The DC source main supply is solar PV model which produce unstable output voltage. The model is done such that the input parameters are the light...
Characterization of Leaf and Comparison with Optical and Millimetre Wave for Identification
By optical photography, we can identify various leafs and vegetation canopies by their variations in color, variations in size and shape, and other optically visible parameters.If we see the same leaf and vegetati...
CONDITION MONITORING AND DYNAMIC BALANCING OF A HOT AIR CIRCULATION BLOWER BY VIBRATION TOOL
Over the years machinery health management has become vital part of the plant operation. Earlier day’s machinery maintenance is only focused on reactive maintenance. In later stages, Vibration Monitoring is a crit...
Filtering Techniques of ECG Signal Using Fir Low Pass Filter with Various Window Techniques
ECG is the graphical recording of the electrical activity of the heart and recognized biological signal used for clinical diagnosis. The ECG signal is very sensitive in nature, and even if small noise mixed with o...
REVIEW PAPER ON THE GRID CONNECTED PV SYSTEM AND RELATED PROBLEMS
As the increasing installation of grid-connected PV systems, especially large systems in the order of megawatts, might lead to some operational problems in the electric network. Such negative impacts include power and v...