NEW INSTRUMENTS TO MEASURE PARAMETERS OF INFRA-LOW FREQUENCY VOLTAGE SIGNALS<br />
Journal Title: Metrology and Measurement Systems - Year 2005, Vol 12, Issue 1
Abstract
The paper presents the design, the principles of operation and the technical specification of two types of infra-low frequency voltage instruments: the integrating converter instrument and the microprocessor instrument. Both instruments are designed for the following frequency range: 0.01 - 10 Hz. The integrating converter instrument measures the mean modulus value and the rms value of voltage. The microprocessor instrument measures the mean modulus value, the rms value, the shape coefficient and the frequency of the measured signal at the same time. The measurement takes from one to four periods of the measured signal.
Authors and Affiliations
BOŻENA KALUS-JĘCEK, ZYGMUNT KUŚMIEREK
Keywords
Related Articles
- EP ID EP83163
- DOI -
- Views 91
- Downloads 0
AUTOMATIC EXECUTION OF INSPECTION PLANS WITH THE I++ DME INTERFACE FOR INDUSTRIAL COORDINATE MEASUREMENTS
Due to the fast advancement of manufacturing technologies for micro- and nanostructured components and the increasing need for sophisticated inspection methods the paper discusses the prerequisites for automatic executio...
CHARACTERIZATION OF DEAD WEIGHT TESTERS AND COMPUTATION OF ASSOCIATED UNCERTAINTIES: A CASE STUDY OF CONTEMPORARY TECHNIQUES<br />
Estimation of uncertainty associated with pressure, measured by a dead weight tester is a key issue of recent times in pressure metrology. Though two different techniques have been used in the past yet there has been lit...
REVISING THE SI: THE JOULE TO REPLACE THE KELVIN AS A BASE UNIT
The joule is proposed to replace the kelvin in the set of SI base units. Arguments in favour of such replacement are presented, including improved standard accuracy and unit system coherence. The joule is also proposed t...
FEASIBILITY AND CHALLENGES OF DSL LOOP MAKE-UP IDENTIFICATION VIA SINGLE-ENDED LINE TESTS
Digital subscriber lines (DSL) offer the possibility to deliver broadband services over the existing telephone network. Yet, before deploying DSL, the subscriber loops must be tested to see if they can support high-speed...
USING AN OPTICAL FIBRE SENSOR TO MEASURE DISPLACEMENT OF ELECTRODYNAMICALLY FORMED SHEET METAL
The paper discusses the use of reflective fibre-optic sensor for the purposes of measuring motion parameters of sheet metal formed at high speed, subject to percussive Lorentz forces extorted in a pulsed magnetic field....