Non contactActive Vibration control of Cantilever Beam Using Neural Networking
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2016, Vol 4, Issue 2
Abstract
The aim of this study is to propose an active non-contact vibration damper to minimize the amplitude vibration of structure. The damper is made of an electromagnet. A neural network control system is proposed in this study to control the current flow through the coil of the electromagnet. The vibration of a cantilever beam type structure is controlled in this study using the proposed electromagnetic actuator. The electromagnet is placed just below the free end of the cantilever beam. The direct current is passed through the coil of the electromagnet during the upward motion of the beam. During the downward motion of the beam the current through the coil of the electromagnet is switch off. Therefore during the upward motion of the beam an attractive force will be applied on the beam which will try to minimize the amplitude of vibration of the structure. In this study it is shown that the non contact damper.
Authors and Affiliations
Ms. Srishti Srivastava, Dr. Sankha Bhaduri
Keywords
Related Articles
- EP ID EP21636
- DOI -
- Views 215
- Downloads 4
Thermal comfort increase using up cycled PET bottles shutters technology
An appropriate technology based on up-cycled PET water bottles utilization is presented. The bottles constitute the main constructive element of a shutters system. The most relevant expected application is to meliorate...
Implementation of Optimized 64 Bit MAC using Vedic Multiplier and Reverse Logic Gate
In advanced digital signal processing the MAC (multiply and accumulate unit) unit acquires the predominant role. The optimized MAC unit deals with improvising the speed, area power consumption. The high speed processors...
Seismic Behaviour Of Multistorey RCC Structure With Different Locations Of Rc X Bracing For Different Aspect Ratio
A structure situated in high seismic area will have to withstand lateral load along with the gravity load. This may result in the development of high stress which leads to the severe damage of the structure. Shear wall,...
Review on Behaviour of Outrigger System on High Rise Structure by Varying Outrigger Depth
Tall building development has been rapidly increasing worldwide introducing new challenges that need to be met through engineering judgment. In modern tall buildings, lateral loads induced by wind or earthquake are ofte...
Electrical conductivity of multi-walled carbon nanotubes doped conducting polythiophene
To improve the functions of conducting polymers, the fabrication of multifunctional conducting polymer Nano composites has attracted a great deal of attention with the advent of carbon nanotubes (CNTs). Addition of CNTs...