NonConformities Analysis in the Industrial Manufacturing Processes
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2018, Vol 41, Issue 3
Abstract
The current article presents the identification, treatment method and encoding of causes that generate defects and types of non-conformities encountered during the manufacturing process in industry. The analysis is performed periodically: monthly, quarterly, yearly, compared to the results of previous similar periods. This process is the basis for establishing the necessary corrective/ preventive measures. The purpose of this study is to show how to achieve data centralization needed to prevent non-quality.
Authors and Affiliations
Elena-Mădălina MILITARU (BRATU), Roxana Alexandra GHEȚA, Andrei-Valentin BRATU, Gabriel Marius DUMITRU, Gabriel IACOBESCU
Keywords
Related Articles
- EP ID EP623300
- DOI 10.35219/mms.2018.3.06
- Views 47
- Downloads 0
Influence of Some Technological Parameters of Fluidized Bed Carbonitriding on the Surface Hardness of Carbonitrided Parts from Low Alloy Steels
The paper describes the experimental research of thermos-chemical treatment of carbonitriding performed on samples of different brands of low alloy steels. The technological parameters whose influence on the carbonitride...
Researches regarding the thermomechanical treatments influence on the structure and characteristics of the aluminium alloys for aeronautics
The laboratory experiments were made on the two aluminium alloyed qualities used for aeronautical industry. More working conditions of the intermediary (PTMI) and finally (PTMF) thermomechanical treatments were used on t...
New Achievements in Manufacturing of Church Bells
Analysis, modelling and design of the bells are a topical issue for manufacturers of bells, in general, and for church bells manufacturers in particular. The transition from manual design of a bell to that achieved with...
Structure-Property Correlation of Composite Materials Based on Cu-Mo Obtained by PVD Method
The paper describes reviews referring to determination of working parameters of the development processes of composites in copper matrix, by vapour-phase deposition method. The molybdenum was used as complementary phase....
Severe Plastic Deformed Pure Aluminum by Equal Channel Angular Pressing
Samples of an aluminum alloy were subjected to an equal channel angular pressing (ECAP) at room temperature for one pass. For the several specimens severe plastic deformation process was interrupted to observe the mater...