Some Researches Concerning the Deep Drawing Process of the Rectangular Box
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2010, Vol 33, Issue 2
Abstract
The deep drawing process of the rectangular boxes is difficult difficulties because of the complexity of the stress and strain states. This paper presents the results of the researches on the variation of the stamping force in function of some deformation factors and the variation of the micro-structure in the maximum deformation zone.
Authors and Affiliations
Nicolae CĂNĂNĂU, Ş. NEGREA, M. ŞEITAN
Keywords
Related Articles
- EP ID EP635562
- DOI -
- Views 61
- Downloads 0
Time Scales of Physico-Chemicaly Driven Processes in Desulphurization CaO-Al2O3 Slag
The paper is dealing with the expression of times scales associated to different physically and physico-chemically driven processes taking place on the slag side of the interface CaO-Al2O3 slags-steel, specific to the st...
Structure and Corrosive Firmness of Composition Materials on the Basis of Copper and Molybdenum Got Method Electron-Beam Technology
The article describe the study of corrosive firmness of composition materials on the basis of copper, obtained by EB-PVD method. Corrosive firmness of condensates was explored by gravimetric method. The especially decrea...
On Corrosion Behavior of Organic Nanocomposite Coatings
Recently, researches on composite coatings of organic nature with the addition of metallic oxide nanopowders have shown an increasing corrosion resistance of metallic materials. Carbon steel shows an improved behavior in...
Fabrication of Ultrafine Low Carbon Metallic Multilayer by Accumulative Roll Bonding
The effect of grain refinements by Accumulative Roll Bonding (ARB) was investigated on low carbon steel. Optical microscopy (OM) and microhardness tests were used to check the phase changes and hardness before and after...
Integrated Analytical Study for the Somes Metalic Artefact Discoveri in Ibida Site, Romania
The paper presents the results of the analyses conducted using the SEM-EDX and micro-FTIR co-assisted techniques, on several metallic artefacts unearthed during the excavations at the (L)Ibida archaeological site in Slav...