Notes on LED Installations in Street Illumination
Journal Title: Analele Universitatii "Eftimie Murgu" Resita. Fascicula de Inginerie - Year 2014, Vol 21, Issue 3
Abstract
The paper presents a study made on choosing LED street lighting installations, such that the quality requirements for exterior artificial lighting are fulfilled. We analyze two types of LED street lighting installations from a technical point of view, together with lighting level and brightness values obtained during the measurements. Following on the field measurements, the lighting quality parameters are calculated, and, for the lighting installation with the best performance, optimal mounting suggestions are made. The optimal quality parameters are calculated by simulations using the Dialux software. The same software and the same light sources we also compute an optimal street lighting by determining the size of the installation that provides the best lighting parameter values.
Authors and Affiliations
Elisabeta Spunei, Ion Piroi, Florina Piroi
Simple and Multi-collision of an Ellipsoid with Planar Surfaces. Part II: Example
This paper is a complementary one for our previous paper [25]. The collision of the ellipsoid is considered to take place with the main planes of the reference system. In our simulation we obtain the following results: n...
Effects of Structural Damage on Dynamic Behavior at Sandwich Composite Beams – Part II- FEM Analysis
This paper presents results obtained by modal analysis on composite beam like structures in healthy and damaged state. The aim is to obtain damage “signatures” for all possible damage scenarios and to use these data to a...
Mechanical Tests of the Dissimilar Welded Samples by Friction
The paper presents the experimental achievement of heterogeneous joints, with dissimilar materials, as well as the analysis of these joints by mechanical and metallographic tests. After traction testing of the specimens,...
Effects of Pre-Treatment and Temperature on the Quality and Drying Rate of Tomatoes
The effect of pre-treatment and temperature on the quality and the drying rate of tomatos (Lycopersicon esculentus) were studied. A 3× 5 factorial experiment in a randomized complete block (RCBD) design was used. Firm an...
Experimental Measurements of Dynamical Wind Load acting on the Overhead Transmission Line
The detailed aim of the study is to determine the distribution of flow velocity, turbulence, the frequency of detaching vortices. These parameters are measured for conductor installed in the wind tunnel and it models the...