Novel Ti2CuCx and Ti3Cu2Cx Carbides Obtained by Sintering of Products of Mechanochemical Synthesis of Ti, Cu and Carbon Nanotubes
Journal Title: Фізика і хімія твердого тіла - Year 2018, Vol 19, Issue 2
Abstract
Mechanical alloying of the elemental powder mixture of titanium and copper (particle size of both powdersis about 40 μm, purity is not less than 99.6% wt. %) was performed in a high energy planetary ball mill to obtainTi:Cu (2:1 and 3:1) compositions. An addition of 1 vol. % of multiwalled carbon nanotubes (MWCNT, averagediameter 10-20 nm) into Ti-Cu charge results in a formation of nanoscaled Ti2CuCx and Ti3Cu2Cx carbides(containing 0.5 and 4.2 at.% of carbon and 30.8 and 37.5 at.% of copper, respectively). These carbides havesynthesized for the first time. Nature of interaction of the charge components at processing in a ball mill hasstudied on test samples using a complex of X-ray techniques. These techniques include a full-profile analysis forthe primary processing of diffractograms obtained with DRON-3M apparatus; qualitative and quantitative phaseanalysis for determining the phase composition of the products of synthesis; X-ray structural analysis to verifyand refine the structural models; Williamson-Hall method for determining the grain sizes. The Vickers hardnessof compacted (by sintering) samples with 20.1 and 27.3 at. % Cu varies substantially within (6.9-7.1) GPa. Thus,the average microhardness of synthesized materials is 7 times higher than that of pure titanium microhardness.
Authors and Affiliations
O. I. Nakonechna, N. N. Belyavina, M. M. Dashevskyi, K. O. Ivanenko, S. L. Revo
Keywords
Related Articles
- EP ID EP411368
- DOI 10.15330/pcss.19.2.179-185
- Views 63
- Downloads 0
Influence of Operating Conditions on Structure and Physical Properties of Polymeric Materials
The changes of structure and physical properties of polymeric materials that exploited in a long time with complex mechanical loads used in pipe systems for high-pressure cold water have been studied. A significant reduc...
Quasielastic Light Scattering and Heat Transfer in Pb2P2S6 Crystals
By analyzing of the central peak on Brillouin light scattering spectra, quasielastic scattering light of Pb2P2S6 crystals was investigated. It was found the differences between empirical and calculated (in terms of therm...
The Dependence of Aftereffects and Contact of Rough Surfaces Composite – Metal from Orientation Factors of Dispersed Phase of Polymer Matrix
Results of researches of influence orientation effects on the friction properties of carbon-plastics and wear mechanism of unidirectional carbon-plastics have been brought in a work. The optimal structure of carbon-plast...
The Impact of d– and f–compression on Anisotropy of Elastic Properties of Single Crystals with Hexagonal Close Packing of Lattice
Characteristic surfaces of Young's moduli were created usingtheory of elasticity of anisotropic crystals and computer processing of experimental data and patterns of their formationwere established. Detailed analysis of...
Схемотопологічне моделювання перетворювачів рівнів сигналів для аналітичних мікросистем-на-кристалі
В роботі наведено результати схемотопологічного проектування і комп’ютерного моделювання перетворювачів рівнів сигналу для інтегральних схем та аналітичних мікросистем на базовому матричному кристалі (БМК) зі структурами...