NOX EMISSION REDUCTION OF CI ENGINE USING OPTIMIZED DUAL BLEND BIODIESEL
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 4
Abstract
This experimental work was conducted on four strokes, single cylinder with variable compression ratio with optimized biodiesel blend of soybean methyl ester and rapeseed methyl ester biodiesels blended with each other in two different ratios. Outcomes investigated and compared with standard diesel fuel. An experiment has been conducted at compression ratios of 16:1, 17:1, and 18:1. The impact of compression ratio on mechanical efficiency and exhaust gas emissions like Nitrogen oxides (NOx), carbon mono oxide (CO), hydrocarbon (HC), has been presented. It was concluded that NOx emission was higher at without blended biodiesel operation compared with diesel fuel and it was opposed by dual biodiesel blending. According to experimental values, there was 28% to 50% reduction at 25 % and 50 % load conditions in NOx emission. There was a 30 % reduction in carbon mono oxide emission and 35 % reduction HC emissions for the optimized blend of 80 % soybean methyl ester and 20% rapeseed methyl ester.
Authors and Affiliations
VIVEK KUMAR NEMA . , ALOK SINGH .
Keywords
Related Articles
- EP ID EP430403
- DOI 10.24247/ijmperdoct20184
- Views 48
- Downloads 0
Vibrational Characteristics Modeling of a PZT5A Mems Resonator Disc Metallized with Alternating Electrical Source
With the purpose of integrating new functionalities in micro electro mechanical resonators, frequency response of such resonators has been gained more importance since long time ago. Previous studies have only concentrat...
Rail Road Wheel Requirements and Manufacturing Processes
A railroad wheel has evolved over the last two centuries with increasing load and speed. A harder wheel maintains its geometry and therefore is able to negotiate the track without giving rise to high forces. This paper d...
Optimisation of WEDM Parameters Using Taguchi Method and Fuzzy Logic Technique for Al-6351
Optimization is one of the techniques used in the manufacturing sector to achieve best operating conditions, which is essential for industries to provide quality stuff at subordinate outlay. This paper aims investigation...
Thermo Gravimetric Analysis of Phoenix Sp. Fiber
The natural Fiber composite offers unique properties compared to those of conventional synthetic Fiber CComposites. Thermal analysis is a vital technique to understand the structural properties of Fiber and its composite...
Experimental Investigation of Twisted Tape Insert in a Double Pipe Heat Exchanger using Aluminium Oxide Nanofluid
This document reports on the experimental investigation of the features of the heat transfer performance of heat exchanging device with tape insert. The experimental investigation was carried out pipe a warped tape inser...