NUMERICAL COMPUTATION OF ELECTRIC FIELDS IN PRESENCE OF CURVILINEAR INTERFACE BETWEEN CONDUCTIVE AND NON-CONDUCTIVE MEDIA
Journal Title: Електротехніка і Електромеханіка - Year 2016, Vol 0, Issue 1
Abstract
Purpose. To elaborate a method of electric field numerical calculation in systems with curved boundaries between conductive and non-conductive media at final volume method usage and application of the rectangular grids. Methodology. At electric field calculation in quasi-stationary approximation, potential of the whole conductive object (rod) is constant. At final difference scheme writing, presence of the curved part of the boundary between conducting and non-conducting media has been taking into account as follows. It was supposed that curved section complements the closed loop on which integration of the solvable equation is done instead of a straight section which extends within a conducting medium. Usage of this approach allows taking into account square of the curved sections of the boundary and distance between surface of non-conductive medium and nearest nodes of the computational grid. Results. Dependence of the maximum electric field intensity on the height and radius of curvature peaks rods has been got with the help of calculations. As a result, a polynomial approximation for the analytical expression of the external electric field intensity, upon which application to the conductive object of a certain height and radius of curvature of its top, corona discharges will develop.
Authors and Affiliations
E. I. Sokol, M. M. Rezinkina, E. V. Sosina, O. G. Gryb
Keywords
Related Articles
- EP ID EP290356
- DOI 10.20998/2074-272X.2016.1.08
- Views 116
- Downloads 0
DETERMINATION OF PULSATION FACTORS OF THE SYSTEM OF SUPPRESSION OF INTERFERING HARMONICS OF A SEMICONDUCTOR CONVERTER
Purpose. The purpose of the paper is to define the pulsation factors of a closed-loop automatic control system (ACS) of interfering harmonics containing a semiconductor converter with double-sided pulse-width modulation...
PROFESSOR P.P. KOPNIAIEV – SCIENTIST, PUBLIC PERSON, ESTABLISHER OF HIGHER ELECTRICAL ENGINEERING EDUCATION (to the 150th anniversary of his birth)
Purpose. To carry out complete historical and scientific analysis of Professor P.P. Kopniaiev's activities and establish his role and place of achievements in the formation of the basic concepts and directions of the the...
THE RELEVANCE OF DETERMINING RESPONSIBILITY FOR VIOLATION OF POWER QUALITY IN TERMS OF VOLTAGE FLUCTUATIONS
Purpose. The purpose of work is the analysis of scientific and technical information for determination of expediency of researches on the determined calculations of individual share of suppliers and consumers in violatio...
LIMITATIONS OF CURRENT OF THE THREE-PHASE ACTIVE POWER FILTER IN THE CONDITIONS OF OVERLOAD AND SHORT CIRCUIT
Purpose. The purpose of the work is to develop a method of limiting the maximum allowable level of current of a three-phase active power filter in conditions of overload or short circuit and a system for the implementati...
ALLOWANCE FOR HEAT AND VIBRATION PARAMETERS VARIATION OF ELECTRIC MACHINES WITH EXTENDED FAILURE INTERVAL
Peculiarities of heat and vibration parameters determination are substantiated for electric machines with extended failure interval under conditions of defects in the main structural units and elements. The necessity of...