NUMERICAL EVALUATION OF THE ELECTRIC FIELD IN A COMPACT SWITCHGEAR OF MEDIUM VOLTAGE
Journal Title: Proceedings of Electrotechnical Institute Prace Instytutu Elektrotechniki - Year 2014, Vol 61, Issue 267
Abstract
Numerical evaluation of the electric field distribution in and around electric power devices can significantly facilitate their designing and redesigning processes. Such an approach is here applied to support the redesigning process of a gas insulated switchgear (GIS) of medium voltage. The electric field has been investigated with a professional software package Maxwell (Ansoft) that employs the finite element method (FEM). The obtained results enabled to determine points of the maximum electric field strength in the load-switch compartment of the considered GIS. These results indicate that the apparatus is oversized and its overall dimensions can be reduced.<br/><br/>
Authors and Affiliations
Wojciech Krajewski
Keywords
Related Articles
- EP ID EP68490
- DOI -
- Views 123
- Downloads 0
THE ANALYSIS OF THE RESONANT LCL CIRCUIT OPERATION UNDER A DISCONTINUOUS INPUT CURRENT CONDITION
The article is focused on the analysis of the LCL resonant circuit, which operates under a discontinuous input current condition. This condition leads to the LCL topology variability phenomenon that drastically changes I...
ADAPTACJA PROGRAMÓW WSPOMAGAJĄCYCH PROJEKTOWANIE OŚWIETLENIA DO SYMULACJI RADIACYJNEGO PRZEKAZYWANIA CIEPŁA
W artykule przedstawiono propozycję wykorzystania programu Dialux, służącego obliczeniom oświetleniowym, do symulacji radiacyjnego przekazywania ciepła przez promienniki podczerwieni. Przeprowadzono porównanie wyników sy...
WENTYLATOR DO PIECA NA PALIWA STAŁE
W pracy przedstawiono wentylator z bezszczotkowym silnikiem prądu stałego przeznaczony do nadmuchu powietrza do komory spalania w piecu na paliwa stałe. Pokazano konstrukcję silnika z magnesami trwałymi, na który zużyto...
GENERAL COLOR RENDERING INDEX AS A CRITERION OF QUALITY OF LIGHT SOURCES ASSESSMENT APPLIED IN EUROPEAN COMMISSION REGULATIONS IMPLEMENTING DIRECTIVE 2009/125/EC (EKODESIGN)
The paper describes requirements established in the Regulations of the European Commission on the implementation of Directive 2009/125/EC in regard to the colour rendering property and the method of verifying of this pro...
CERAMIC SEPARATORS TO PLACE BETWEEN GREEN COMPACTS DURING VARISTOR SINTERING
ZnO metal oxide varistors are created using typical ceramic technology. During the process of sintering the green compacts may glue together and stick to each other so hard that they cannot be separated without damaging...