Numerical modelling of bolted composite joints. Bolts rigidity effect on normal stresses in the composite layers
Journal Title: Mechanics and Advanced Technologies - Year 2017, Vol 79, Issue 1
Abstract
Modern finite element programs have the opportunity to create finite element models (FEM) by "gluing" uncoordinated meshes of finite elements. This allows, in particular, to obtain relatively small 3D models of polymeric composite materials (PCM) in bolted connections for PC calculations, in which the PCM in the hole zones is modeled layer by layer, and at some distance from them - approximately, according to the theory of the "effective module". In previous model calculations of single-shear two-row bolted connection with PCM (contact task) with detailed layer-by-layer modeling of the PCM structure in the hole zones, regularities were revealed for the distribution of contact forces in the bolt-hole surface contact, bolt stresses and near- contacting in the holes with the lateral surfaces of the bolts. In the article, based on numerical calculations, the regularities of changes in normal stresses on the contact surfaces of holes in PCM, in laying layers at 0 and 90 degrees, were found, depending on the rigidity of the bolts.
Authors and Affiliations
Y. Dyfuchyn, K. Rudakov
Keywords
Related Articles
- EP ID EP456480
- DOI 10.20535/2521-1943.2017.79.95756
- Views 65
- Downloads 0
Rigidity of the affected femurs with systems of surgical treatment
Purpose. Subject matter of the present paper is to investigate the characteristics of rigidity and reliability of fixing of pathological changes at metastatic defeat are investigated in real, including cyclic, the modes...
Study of energetic balance of the hydraulic system with fixed displacement pump and pressure relief valve
<p><em>It was analyzed </em><em>the basic schematics implementing energy level of industrial hydraulic systems. It was considered the structure and composition of the hardware system of fixed displacement pump and pressu...
Programming of adaptive machining for end milling
The problem of performing adaptive machining to program the milling of the detail contours on the CNC machine in case of virtual-location procurement is solved. The correction of the CNC-program by measuring the actual p...
Вплив охолодження до 213 К на міцність рейкової сталі
<em>В статті представлені результати експериментального дослідження впливу охолодження до 213 К на механічні характеристики рейкової сталі перлітного класу після її тривалого напрацювання в залізничній колії. Встановлено...
ДОСЛІДЖЕННЯ ВПЛИВУ БАГАТОКРАТНОЇ ЛАЗЕРНОЇ ОБРОБКИ НА СТРУКТУРУ ТА ВЛАСТИВОСТІ ЗІСТАРЕНОГО ДУРАЛЮМІНУ
<em>Наведено<strong> </strong>результати експериментальних досліджень впливу енергетичних параметрів лазерної багатократної обробки сплаву АА2024 – Т4</em> <em>на його структуру та мікротвердість. Мета роботи - визначит...