Numerical simulation of dielectric barrier discharge in air
Journal Title: Технічна механіка, Техническая механика, Technical Mechanics - Year 2014, Vol 4, Issue 4
Abstract
The aim of this work is to develop a new numerical-analytical model for the qualitative and quantitative simulation of dielectric barrier discharge processes in operation of the plasma actuator. This model includes a description of nonstationary electrodynamic processes, kinetic phenomena and plasma chemical reactions. A uniform implicit numerical algorithm for an efficient solution of the inhomogeneous system of the initial equa-tions was realized. The main feature of the developed numerical-analytical model is the use of a rational number of equations for the description of all the main nonstationary parameters of the dielectric barrier discharge in air. The generation and development of the streamer for a real configuration of the plasma actuators were obtained on the basis of this model. The developed model of the dielectric barrier discharge is designed for an adequate simulation of the Lorentz force acting on the turbulent flow of partially ionized air in a wide range of amplitudes and frequencies of the applied voltage as well as parameters and properties of the dielectric surface
Authors and Affiliations
D. Redchits
Keywords
Related Articles
- EP ID EP359255
- DOI -
- Views 76
- Downloads 0
Numerical analysis of stresses of bone and implant system of hip joint acetabulum
Hip replacement has need for an analysis of biomechanics of components of a prosthetic implant after a surgical procedure. Studies of the behavior of the bone-implant system with methods of a mathematical analysis are ur...
Bifunctional system of thrust-vector control of liquid rocket engine with turbine gas injection into nozzle
The results of the study of a bifunctional thrust- vector control system of a liquid rocket engine based on the combined use of the mechanical (engine swinging) and gas-dynamic (the gas turbine injection into the nozzle)...
Numerical simulation of transonic turbulent flow through impeller of axial compressor…
The work discusses the numerical simulation of a transonic turbulent flow through impeller of the Rotor 67 axial compressor with the application of the OpenFOAM open programming code. The selection of the turbulence mode...
Computations of cooler discharge from heat-stressed channels
The fundamentals of a procedure for a discharge of a two-phase heat carrier from the drain channels of heat exchangers that heat up to the temperatures exceeding the boiling point of the heat carrier are presented. The p...
Рhase ambiguity resolution in relative displacement measurement by microwave interferometry
This paper addresses microwave interferometry, which is widely used for displacement determination in various engineering applications. The aim of this paper is to develop a technique for phase ambiguity resolution in me...