Numerical Studies of the I-Beam Floor Beam of 4th Class of Section According to Eurocode 3
Journal Title: Металлические конструкции - Year 2017, Vol 23, Issue 1
Abstract
In the article numerical investigations of the beam of I-beam cross-section according to Eurocode 3 have been given: «Steel structures» [1]. The I-beam section beam is produced as an element of the general 4th class, in which the loss of local stability occurs before reaching the yield point in any one or more regions of the cross-section. To ensure the load-carrying capacity of the beam, the local stability of the wall, the load-bearing capacity of the wall on the shear were checked. The load-bearing capacity of the section was checked from the combined effect of shearing force, bending moment and axial force. Based on the calculation results, the metal capacities of the beams were determined depending on the height and wall thickness, as well as the pitch of the transverse stiffeners. Based on the obtained results, the optimum thickness and height of the beam wall and the required step of the transverse stiffeners have been determined. The analysis of the obtained values has been carried out and the main factors influencing the metal intensity of the beam of the 4th class have been determined.
Authors and Affiliations
Andrey Alyokhin, Anton Burdel
Keywords
Related Articles
- EP ID EP448728
- DOI -
- Views 130
- Downloads 0
The Method of Determination of Mounting Stress-Strain State-Span Hinge-Rod Metal Coatings
The article made overview previous studies in installation loads and geometrical deviàtions. The article shows the methodology and findings of the mounting stress-strain state-span hinged-rod metal coating by taking into...
Study of General Stability of Large-Span Pipe-Concrete Arch Structures
The results of analysis of general stability of long-span shotcrete of the arched coverage are presented in the article. A calculation is produced in a calculable complex LIRA-SAPR 2013. The main purpose of work was dete...
Geometrical Modeling of Icing Process on the Conductors of Overhead Power Transmission Lines
Questions, touching geometrical modeling of simulation of icing process on the conductors for overhead power transmission lines, are considered in the article. The goal – definition and predictive modeling of ice load on...
Technique of Numerical Analysis of the Intense Deformed State of Steel Vertical Cylindrical Tanks with Taking into Account the Defects of Geometrical Form
The work shows a generic geometric and computer simulation algorithm of the actual surface of the tank wall taking into account both General and local geometry imperfections. Proposed integrated approach to the numerical...
Comparative Analysis of the Efficiency of Structural Solutions of Large-Span Coverage on the Curvilinear Plane
The article presents an analysis of the influence of various design solutions on the spatial work of long-span coverage. The results of numerical studies of the rational constructive solution both on the basis of efforts...