Geometrical Modeling of Icing Process on the Conductors of Overhead Power Transmission Lines
Journal Title: Металлические конструкции - Year 2016, Vol 22, Issue 1
Abstract
Questions, touching geometrical modeling of simulation of icing process on the conductors for overhead power transmission lines, are considered in the article. The goal – definition and predictive modeling of ice load on OPTL constructions. The task of this research is to obtain the analytical description and the construction of a theoretical model of the surface icing of the conductor OPTL. Under the theoretical model is meant approximate, analytical determination of the surface, corresponding to the initial materials for modeling. For achieving this goal, it was done mathematical modeling, which is based on experimental studies on physical modeling of ice on conductors in the laboratory. As a principled approach it is suggested to transfer from physical parameters to geometrical for solving tasks.
Authors and Affiliations
Yaroslav Nazim
Keywords
Related Articles
- EP ID EP427153
- DOI -
- Views 133
- Downloads 0
Calculation Methods of Standard Surface Area of Flat Roofs for Internal Wasteway through Cast Iron Pipe and Funnel Set-point Diameters in the Transcarpathian Region
The calculation of standard surface areas of flat roofs made by SNiP II-32-74 and DBN V.2.5-75 2013 and according to data III B and IV climatic regions excluding the results of observations of precipitation at 9 weather...
Metal multifaceted poles as a base of the urban infrastructures
The article deals with national and the foreign experience of metal multifaceted bent conical poles (tubes) at creation of tower structures directed to a providing of livelihood needs of modern cities. The analytic revie...
Updated Assessment of Joint Work of Thin-Sheet Membrane Coating with a Reinforcing Element
In the article it has been considered the technique of determination of effective flange width of I-beam used in conjunction with sheet membrane coating, including on the basis of the computation of the reduction coeffic...
Estimation of Stability of Central Compressed Rods of Structural Coatings Taking into Account Structural Features of Knot Connections and Nonlinear Work of Material
The paper presents the analysis of the stability of centrally compressed rods, taking into account the structural features of the node joints for which the models of volume finite element rods are made, the analysis of t...
Determination of the Stress Concentration Coefficient in the Anchor’s Area of Composite Span Structures of the Road Bridges
The article presents the results of analysis of the tensely-deformed state of a five-span steel-reinforced concrete structure of a road bridge, made on a beam unbroken circuit. The calculation is performed in the LIRA co...