Analysis of Typical Design Solutions of Conveyor Galleries
Journal Title: Металлические конструкции - Year 2016, Vol 22, Issue 4
Abstract
The types of existent constructions of conveyer galleries have been systematized in the article, classification over of conveyer galleries has been given. Structural forms and elements of entablatures and flight galleries, and also the building materials used for erection of conveyer galleries of industrial enterprises of the different setting, have been described and structured. A structural form of object is one of determinatives at the choice of method of editing. The account of individual features of structural type of conveyer gallery at the choice of method of editing in the straitened terms of operating enterprise allows to accept a reasonably-rational decision, shortening to possible a minimum of expense of labour and material resources.
Authors and Affiliations
Anatoliy Yugov, Roman Ignatenko, Mihail Volskiy
Keywords
Related Articles
- EP ID EP448624
- DOI -
- Views 131
- Downloads 0
The Method of Determination of Mounting Stress-Strain State-Span Hinge-Rod Metal Coatings
The article made overview previous studies in installation loads and geometrical deviàtions. The article shows the methodology and findings of the mounting stress-strain state-span hinged-rod metal coating by taking into...
The Analysis of the Stress-Strain State of the Optimal Corner Dead-end Support of Overhead Power Transmission Line 110 kV
The analysis of the stress-strain state of dead-end OPTL support which is considered as spatial repeatedly statically indefinable through system with rigid joints is performed. The technique and results of calculation of...
Accounting of Joint Work of Thin-Sheet Membranes with Fastening of the Stabilizer System
The article considers the existing methodology for determining the effective width of the plate when working together and reinforcing stiffener sheet membrane coating, including – the method of reduction ratios. It has b...
Analysis of the influence of structural features of nodal connections on the load-carrying capacity of centrally compressed rods of structural coatings
The article presents the analysis of the stability of centrally compressed rods with initial geometric imperfections, performed with the help of volumetric finite element modeling of rods taking into account the design f...
Numerical Determination of The Probability of Failure of a Bent Steel Rod
In this paper, we consider three different methods for calculating the probability of failure (the method of two moments, statistical tests and Monte Carlo) of the rod element. As an example, a calculation is made for a...