Numerical Study on Shape Discrimination of Land Subsidence Groove during Double-line Shield Construction
Journal Title: Urban Mass Transit - Year 2024, Vol 27, Issue 10
Abstract
Objective The shape of the land subsidence grooves during double-line shield construction varies with the clear distance and buried depth of the tunnel. Thus, it is necessary to conduct an in-depth study on the evolution mechanism of the subsidence groove with clear distance and buried depth. Method Based on the double-line shield project between Xiaonanjie Station and Renmin Park Station of Chengdu Line 17, numerical simulation is used to analyze the shape change process of the subsidence groove in the double-line shield construction under different clear distance-buried depth combination working conditions. Based on the double-line land subsidence formula, the values of each item in each working condition are fitted, and the shape criterion S of the subsidence groove is proposed. Result & Conclusion Peck formula and Liu Bo formula can express the simulated monitoring results of land subsidence well. When S∈0.319, 0.536), the subsidence groove is in a V-shape; when S∈0.536, 0.783), the subsidence groove is in a U-shape; when S∈0.783, 1.120), the subsidence groove is in a shallow W-shape; when S∈1.120, 3.873), the subsidence groove is in an asymmetric shallow W-shape; when S≥3.873, the subsidence groove is in a double V-shape or a double W-shape. When the buried depth of the tunnel is 1D (D is the tunnel diameter) and the clear distance between the two tunnels is 2D to 3D, the ground near the middle line of the two tunnels will bulge, and with the increase of the clear distance, the range of the bulge will increase accordingly. On the ground directly above the center of the two tunnels, due to the effect of the shield tail grouting pressure, part of the subsidence is offset, resulting in a unique double W-shape of the subsidence groove in this area.
Authors and Affiliations
Zhuangzhuang WANG, Xueqing WANG, Jingjing YANG, Yunmeng ZHAO, Bo CHEN
Keywords
Related Articles
- EP ID EP749211
- DOI 10.16037/j.1007-869x.2024.10.008
- Views 46
- Downloads 0
Industrial Design Methods for Modularization and Pedigree Comprehensive Application in Rail Transit Passenger Vehicles
Objective To address the difficulties faced in the industrial design of rail transit passenger vehicles, it is necessary to integrate innovative industrial design thinking and concepts to establish a comprehensive method...
Effectiveness Verification of Train Real-time Positioning Function Based on Speed Measuring Radar and Electronic Map under TACS
Objective At present, CBTC (communication based train control) precise train positioning technology is prone to high cost of engineering construction and reconstruction, positioning errors and etc. Therefore, it is neces...
Research on the Train Surface Pressure Characteristics in Passing through Tunnels at Speeds of 400 km/h and above
［Objective］ In order to ensure the running safety of trains with a speed of 400 km/h and above when passing through tunnels and improve the passenger ride comfort, it is necessary to adopt the numerical simulation meth...
Cause analysis of Braking Noise of A Metro Project with Aluminum Disc
Objective In a certain project, significant noise is generated during the last braking parking phase, affecting the surrounding residents rest and passenger comfort due to noise pollution caused by braking. Therefore, it...
Dynamic Health Evaluation Method for Metro Communication System Based on Random Forests Algorithm
Objective The health of metro communication system has a direct bearing on the efficiency and safety of metro operation. In view of the problems such as one-sided evaluation results and subjective evaluation criteria in...