On the calculation of a model of a three-dimensional turbulent diffusion plume
Journal Title: Modern Innovations, Systems and Technologies - Year 2022, Vol 2, Issue 4
Abstract
In this paper a three-dimensional model of diffusion combustion is presented in the case of the outflow of a combustible gas mixture from a rectangular nozzle and propagating in a heated (with a passing) air flow. For the three-dimensional case, the transformation of the multicomponent concentration equation is described in detail using the conservative Schwab-Zeldovich function with respect to excess concentrations, which reduces the number of diffusion equations to one for a four-component mixture. It is assumed that on the surface of the flame front, the flows of the oxidizer and fuel must satisfy the condition of stoichiometric equality of the consumed and formed substances at the flame front are equal to zero. The three-dimensional system of Navier-Stokes equations is used to describe the flow. To calculate the turbulent viscosity, an algebraic model is used that takes into account the three-dimensionality and temperature inhomogeneity of the jet. A number of numerical results are given as the influence of the initial value of the velocity of the combustible mixture on the flame parameters. During diffusion combustion of a propane-butane mixture. It was found that an increase in fuel velocity does not always lead to an increase in the maximum temperature at the flame front, with other parameters unchanged.
Authors and Affiliations
Safar Khojiev, Shukhrat Yuldoshev, Shamshod Savriev
Keywords
Related Articles
- EP ID EP711238
- DOI 10.47813/2782-2818-2022-2-4-0339-0349
- Views 76
- Downloads 0
Cutting tool stability and cutting speed
The article notes the importance of mechanical processing of parts produced for agricultural and engineering enterprises. It analyzes the use of modern cutting tools to give machine parts precise dimensions, a clean surf...
Calculation models for the assessment of deflected mode in the surface layer of parts during surface plastic deformation by running and smoothing
The choice of a calculation model for the assessment of the stress state during finishing-hardening processing, in particular, during shot-impact processing are substantiated in the work. Analytical dependencies for calc...
Hydraulic pressure during roller squeezing
The results of the study of hydraulic pressure in the roll squeezing of wet materials are given. Mathematical models of hydraulic pressure distribution in the squeezing zone are developed. It is revealed that the hydraul...
Research on computer vision application in industry field: focus on distribution network engineering
The operation of distribution networks is currently facing potential safety and quality defects that pose significant hazards. One solution to strengthen management, reduce manual workload, and improve efficiency and qua...
A dynamic model of the transport and logistics chain under conditions of interstate confrontation
In this paper, it is proposed to assess the effectiveness of the logistics support system under given conditions of interstate confrontation with the use of non-military methods of coercive pressure, taking into account...