ON THE EXPLOSIVE CHARACTERISTICS AND RATIONAL USE OF DETONITE M WHILE HEADING THE MINE OPENINGS
Journal Title: Вестник научного центра по безопасности работ в угольной промышленности - Year 2018, Vol 0, Issue 2
Abstract
Detonite M is the most powerful of nitro- ether- containing industrial explosives used to destroy rather hard rocks in the mining industry. STS JSC «FNPTs» «Altai» as the only producer of nitro- ether- containing explosives in Russia in 2003 started to produce detonite M in 32 mm diameter cartridges. The recipe was modernized improving its technological production parameters and the increasing power and detonation characteristics. However, at present, the selling prices for detonite M are significantly higher than those for ammonite 6ZGV, and despite its high efficiency and energy characteristics, sales are limited. The paper presents some studies results on the rational use of detonite M while heading the openings in the Kaz branch mines of AO “Evrazruda”. The use of detonite at the faces along with ammonite 6ZGV significantly increases the blastholes utilization rate and production volume with improved crushing quality.
ABOUT DUST CURTAIN CRITICAL PARAMETERS, ENSURING A COMPLETE EXTINCTION OF GAS DETONATION WAVE
The gas mixture CH4 + 2O2 + N2 attenuation of the detonation wave is studied experimentally propagating along dust air curtains with medium bulk density ρd = 2.2 ÷ 3.5 g/l at initial pressures p0 = 0.1 ÷ 0.01 MPa. Studie...
VENTILATION PIPE COLUMN AERODYNAMICS UNPRACTICALITY TO MEET THE NEEDS OF PREPARATORY MINE OPENING AERODYNAMICS
The article discusses three types of aerogasdynamics in mine preparatory openings together with the aerogasdynamics of the ventilation column and the fan when forced ventilation is used. It has been revealed that the gr...
CONSTRUCTION LABOR PROTECTION AND INDUSTRIAL SAFETY CONTROL SYSTEM AND BIM-TECHNOLOGY AS A POSSIBLE TOOL IN THE SAWC (SPECIAL ASSESSMENT OF WORKING CONDITIONS) SYSTEM AND A RISK-BASED APPROACH
The urgency of work is caused by the fact that the main task of occupational safety and health in the construction industry is to ensure safe working conditions, preserve the life and health of workers, reduce accidents...
BUILDING UP A SITUATIONAL MODEL OF AN ACCIDENT
One of the goals of functioning for the coal mines of production control and labor protection is the prevention of occupational injuries. The article brie y describes the patterns of injury, usually presented in the cont...
COMPUTER SIMULATION OF METHANE-AIR MIXTURES COMBUSTION AT ITS INITIAL DEVELOPMENT STAGE
An approach to computer simulation of methane- air mixtures combustion at an initial stage of development is described using FlowVision software. We describe The boundary conditions and input data for computer simulation...