On Tribological Behavior of Synthetic Fiber Reinforced Polymer Composites Modified With Fillers: A Review
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 5
Abstract
Polymer composites reinforced with fibers have been consistently employed in applications involving friction in many industrial components. Though natural fibers possess many advantages, they absorb greater moisture and also their impact properties being quite low, ultimately degrades the mechanical properties. On the other hand, synthetic fibers offer greater specific strength, less density and extraordinary mechanical and tribological properties and hence substituted with many natural fibers. In this point of view, an effort has been made in this article to highlight the tribological behavior of a number of synthetic fiber reinforced polymer matrix composites modified by fillers to satisfy greater strength or modulus requirements.
Authors and Affiliations
Ravikiran Kamath. B, Sudheer. M
Keywords
Related Articles
- EP ID EP671635
- DOI 10.24247/ijmperdoct20198
- Views 70
- Downloads 0
STUDY OF RELATIVE ROUGHNESS PITCH AND HEIGHT ON HEAT TRANSFER COEFFICIENT OF SOLAR AIR HEATER WITH ARTIFICIAL ROUGHNESS
Solar air heater have low thermal performance because of development of the laminar sub region near the absorber wall to break this viscous sub layer and improve absorption efficiency experimental study shows that artifi...
Buckling Analysis of Carbon Epoxy Trailing Edge Wing Rib
For Aerodynamic reasons, the chord wise of wing contour must be maintained without appreciable distortion. To hold the skin’s stringer wing surface to required contour shape, and also to limit the length of the stringers...
Quench Hardening and Mechanical Characterization of AISI 4140 Steel
AISI 4140 steel is the medium carbon low chromium steel used for a variety of structural applications. Generally this type of steel is available commercially in hot/cold rolled or as-cast conditions. This grade of steel...
Parametric Study in Surface Finishing of Inconel 718 Surface with Magnetic Abrasive Finishing Process
Inconel 718 is a nickel based alloy, used in high pressure and temperature applications, due to its high strength and thermal resistance properties. Machining of Inconel 718 is very difficult due to its toughness. Surfac...
Automation: Petrol Depths Status Via Level Sensor and Wireless Sensor
Petroleum storage wells are uploading petrol to their bunk well day by day at any time. Petroleum bunks are holding manual status updates of remaining petrol capacity in their wells for each period. An employee will chec...