Parametric Study in Surface Finishing of Inconel 718 Surface with Magnetic Abrasive Finishing Process
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2017, Vol 7, Issue 4
Abstract
Inconel 718 is a nickel based alloy, used in high pressure and temperature applications, due to its high strength and thermal resistance properties. Machining of Inconel 718 is very difficult due to its toughness. Surface finishing of Inconel 718 is also a difficult task to deal with. In the present work, the magnetic, abrasive finishing process has been used for external surface finishing of Inconel 718 flat surfaces (5 mm thick plate). A number of experiments have been designed and conducted, to study the effect of three selected process parameters, i.e., processing time, pole rotation speed and weight percentage of abrasives, on percentage improvement in surface finish. An ANOVA has been used to analyze the experimental results. Experimental results indicate that, all the above mentioned parameters have considerable effect on surface finishing, of Inconel 718. Effect of different process parameters on surface microstructure has also been observed, using scanning electron microscopy.
Authors and Affiliations
Lovepreet Singh, Harish Kumar, Arun Kumar
Keywords
Related Articles
- EP ID EP240320
- DOI -
- Views 115
- Downloads 0
An Inverse Kinematics Analysis of Space Station Remote Manipulator System (SSRMS) Using Genetic Algorithms
The importance of RobotArms (Serial Manipulators) is increasing rapidly in the last few years in space, industrial and medical applications. An important part of Robot Arms is to achieve desired pose (position and orient...
Properties of Self Similar Solutions of Reaction-Diffusion Systems of Quasilinear Equations
In this paper, considered a parabolic system of two quasi linear reaction-diffusion equations with the source and absorption task and the properties of self-similar solutions of a system of quasi linear reaction-diffusio...
A Preliminary Evaluation to Support DfD of Handcrafted Products
Both economical and environmental aspects significantly influence the design process since the early phases of preliminary design. The total Life Cycle Assessment (LCA)and the End Of Life (EOL)of products have to be defi...
A Critical Review on Traction Control System
This paper shares an investigation of vehicle footing control and examines its significance in interstate mechanization. A vigorous control technique is intended for slip control, which thus controls the footing. It is i...
A Comparative Study on Microstructure and Mechanical Properties of A356-B4c and A356-Graphite Composites
This work investigated the influence of boron carbide and graphite on the microstructure and mechanical behavior of A356-B4C and A356-Graphite composites. The investigation reveals the effectiveness of incorporation of B...