Online Battery Parameter And Open Circuit Voltage (OCV) Estimation Using Recursive Least Square (RLS)
Journal Title: Techné : Jurnal Ilmiah Elektroteknika - Year 2016, Vol 15, Issue 1
Abstract
After decades, the battery usage has been widespread for many applications, especially in the field of Electric Vehicle (EV). The battery is a very important component in the EV. Because the battery as the primary power source replacement of the fossil fuel. Therefore, the condition of the batteries should be always in good condition. To prevent failure of the battery for battery management system (BMS) is needed. BMS is a system to regulate the use of the battery and protects the battery from the failure of the battery supply. Many factors can be monitored at BMS, one of which is a State of Charge (SOC). SOC determination is directly related to the estimated OCV (Open Circuit Voltage). The accuracy of the estimation algorithms depend on the accuracy of the model selection to describe the dynamic characteristics of the battery. This study begins with the selection of the right model (fig.1, fig.2, fig.3) for estimating OCV. Selection of appropriate model using RLS algorithm for estimate the battery terminal voltage. Parameter that reference for determining the selection of the model is the max, min, mean, RMSE, mean RMSE of the error. Later models have been used to estimate the OCV. The result based on this research shows that modeling with n = 1 is the best result to be used in model parameter estimation and OCV battery in term of the smaller max, min, mean, rmse error. This research also show us that RLS algorithm can be estimate the parameters of the batery, OCV (fig.4), and terminal voltage of the battery with an error less than 0.1%
Authors and Affiliations
Harmoko Harmoko, Dani Prasetyo, Sigit Agung Widayat, Lora Khaula Amifia, Bobby Rian Dewangga, Adha Imam Cahyadi, Oyas Wahyunggoro
Keywords
Related Articles
- EP ID EP565954
- DOI 10.31358/techne.v15i01.141
- Views 70
- Downloads 0
Analisis Sentimen untuk Komentar pada Sistem Pencarian Kost Menggunakan Metode Support Vector Machine (SVM)
Dengan terbatasnya informasi bagi mahasiswa dalam mencari kost, diperlukannya usaha dan waktu untuk mendapatkan informasi. Maka sistem pencarian kost akan sangat dibutuhkan untuk mempermudah dalam mencari kost. Atas dasa...
Sistem e-money berbasis Contactless Smartcard dengan Teknologi RFID
Sistem pembayaran elektronik makin banyak dilakukan baik melalui phone banking, Internet banking, maupun smartcard berbasis RFID. Selain kemudahan dalam bertransaksi, sistem pembayaran elektronik juga menawarkan keringan...
Implementasi Protected Extensible Authentication Protocol (PEAP) menggunakan Remote Access Dial In User Service (RADIUS)
Perkembangan teknologi jaringan nirkabel memungkinkan kita melakukan komunikasi tanpa harus dibatasi oleh panjangnya kabel. Namun teknologi nirkabel rentan dari sisi keamanan karena pesan dikirimkan secara broadcast. Ole...
Pengembangan Algoritma untuk Penyempurnaan Gerakan dan Kestabilan Robot Humanoid berbasis Kondo KHR – 3HV
Meskipun R2C telah meraih juara dua tingkat nasional dalam KRSBI 2013 (Kontes Robot Sepak Bola Indonesia 2013), robot humanoid yang dimiliki oleh R2C masih memiliki kekurangan dalam sistem kontrol dan motion (gerakan). S...
Sistem Monitoring Energi Lampu Penerangan Jalan Umum Berbasis Wireless Sensor Network dengan Topologi Mesh
Pada makalah ini dibuat suatu sistem untuk memantau energi listrik yang terpakai pada lampu penerangan jalan umum dan mengirimkan datanya, berbasis wireless sensor network dengan topologi mesh. Terdapat modul slave yang...