“OPEN-ENDED LABORATORY” METHOD APPLIED IN THE CONCEPTION OF A TEST BENCH TO SIMULATE A DIESEL - ELECTRIC TRANSMISION
Journal Title: ANALELE UNIVERSITATII DIN CRAIOVA - Seria Inginerie electrica - Year 2011, Vol 35, Issue 35
Abstract
This paper describes the application of a creative method (open-ended laboratory) in a research team work, to create an experimental bench which could be used, with various objectives, in the study of Electrical Machines used in a complex drive system. The paper is structured in two levels: the first level is a review on the creative method of work and the second is the study of the technical problems. The conception of this test bench was made using a new and creative method named “open-ended laboratory” and a modular laboratory of electrical machines. The technical subject of this paper is the synchronous generator as a component in the traction electric system with diesel electric transmission. To make a synthesis of this subject was used the concept of the flow chart, a new interactive mode of thinking in team. In this creative work was used also the brainstorming technique. Concerning the technical problem was studied a lot of literature on the problem of diesel electrical transmission. A complex (technological, materials, engineering and financial) approach is required to solve the arising engineering problems, so, the starting point of this study is the actual context of diesel electrical traction and the constraints imposed to the synchronous generator. Experimental data were recorded with an acquisition board and modeled with LabView.
Authors and Affiliations
Gabriela-Dana PETROPOL-SERB, Ion PETROPOL-SERB, Ioan CAUTIL, Adrian MUNTEANU
Keywords
Related Articles
- EP ID EP140116
- DOI -
- Views 123
- Downloads 0
Monitoring and Analysis of the Electrical Parameters for an Industrial Consumer using LabVIEWEnvironment
This paper presents a case study for monitoring the quality of electric energy in an industrial consumer. The measurements were carried in the power supply point where the quality of the electric energy is influenced by...
DC-Traction Substation with Improved Power Quality and Regeneration Capability
In the DC-traction substations, the diode rectifi-ers are commonly used to provide the needed DC-voltage for vehicles. Unfortunately, they attract important issues of power quality, of which the most significant is the i...
The Influence of the Output Current Deforming Regime on the Input Current Harmonics for a Three-Phase Rectifier Bridge
The present paper was created based on the desire of the author to realize a systemic approach of static converters in general and especially of rectifiers. Looked as system from energetic point of view, a rectifier coul...
An Analysis on Efficiency of Wireless Transfer Energy Due to a Misalignment of Two Coils
Function of the alignment of the two magnetic coupled coils, a procedure, to choose the proper structure of the two coils used in the wireless power transfer systems (WPTS’s), is presented. The deviation in the alignment...
Experimental Evaluation of Induction Heating Systems with Phase-Shift Voltage Resonant Inverter
This paper is devoted to the synthesis of the power control loop for a single-phase resonant inverter controlled by phase shift and used in an induction heating system. It starts from the assumption that, if the...