Using dSPACE in the Shunt Static Compensators Control
Journal Title: ANALELE UNIVERSITATII DIN CRAIOVA - Seria Inginerie electrica - Year 2013, Vol 37, Issue 37
Abstract
This paper presents the design and implementation of an active filtering system based on a DSP acquisition board. This approach has the advantage of versatility regarding the command and control section of the filtering system, for a given power topology. The power section contains the typically components of an active filter, such as the three phase voltage source inverter, the first order interface filter, and the compensating capacitor. Thus, the rated power of the filtering system is imposed by the compensating capacitor value, and by the power transistors rated current and voltage. On the other hand, the command and control section of the filter is limited only by the system transducers. Therefore, the system can have any compensating current computation algorithm, which can also be changed at any moment, and, at the same time, the system can have any topology for the current and voltage regulating loops. Although the active compensator can be controlled using a physical control panel, the easiest and most versatile way is to use a virtual control panel, which can be built using the acquisition board specific software. The disadvantage of this system is that the industrial computer which contains the acquisition board must be located in the close vicinity of the inverter.
Authors and Affiliations
Vlad Suru, Mihaela Popescu, Alexandra Patrascu
Analysis of Reluctance Synchronous Motors Static Stability Using Routh-Hurwitz Criterion
This paper analyzes the static stability of the reluctance synchronous motors, by means of the Routh- Hurwitz criterion. In this purpose, there is made a brief introduction which presents the types of disturbances occurr...
Coupled Magneto-Thermal Model for an Encapsulated Busbars System Using QuickField
In this paper, we propose an approach for the magnetic and thermal modeling of an encapsulated busbars system, in three-phase execution, for high voltage using QuickField software. The paper proposes a numerical...
Indirect Current Control Algorithm Implementation and Validation, for Active Filtering Using Constant Switching Frequency Hysteresis Controllers
The aim of this paper is the implementation and the experimental validation of a constant switching frequency hysteresis current controller as a part of an active filtering system control algorithm, based on the indirect...
DATA ACQUISITION AND PROCESSING SYSTEM FOR SMART MEASUREMENT OF POWER IN HV GRIDS BY OPTOELECTRONIC MEANS
The present concerns related to the smart use of energy require changes in the way in which the electric energy consumption management should be performed, under the circumstances connected to the assurance of electric e...
Testing a Filtering and Regeneration System on a Recuperative Stand
The paper has three main objectives: the presen-tation of a laboratory model of a system for active filtering and regeneration (SISFREG) developed through an applied research collaborative project in the frame of Partner...