OPERATION OF BRIQEETTING ROLLER PRESSES WITH AN ASYMMETRICAL COMPACTION UNIT
Journal Title: Journal of Machine Construction and Maintenance - Year 2018, Vol 109, Issue 2
Abstract
The key issue in the briquetting process in a roll press is to properly customise the working surface. The conventional symmetrical compaction units employed in roller presses are often unsuitable for the consolidation of materials that show quasi-plastic properties or those which show significant elastic deformation after the pressure is removed. This is caused by the fact that ready-made briquettes tend to remain in moulding cavities or crack along the parting plane. This problem can be solved by using asymmetrical compaction units. They make it possible to expand the range of fine-grained materials, especially those which are hardly consolidable in a roll press and which can be used to make briquettes with satisfactory quality indexes. This article outlines the basics of the operation of roller presses equipped with asymmetrical compaction units and their current evolution.
Authors and Affiliations
MICHAŁ BEMBENEK, Taras ROMANYSHYN
Keywords
Related Articles
- EP ID EP615007
- DOI -
- Views 125
- Downloads 0
THE POLYAMIDE MEMBRANES MODIFIED BY COPPER OXIDE USING PVD TECHNIQUES
The aim of this research was to examine the influence of process parameters of low-temperature plasma treatment on the permeability, stability, and antibacterial properties of polyamide membranes. As a result of the work...
MULTIFUNCTIONAL INTERPHASES IN ELECTROSTATIC COATING OF ELECTRICALLY NON-CONDUCTIVE MATERIALS
Solvent-based or waterborne coatings commonly used in surface finishing of plastic or composite-based products exhibit very low spray transfer efficiency, typically not exceeding 30–35%. Powder coatings, an attractive 10...
RMS PROCESS CONTROL ALGORITHM BASED ON THE VOLTAGE METHOD
For the last several years, considerable progress in the use of the plasma surface engineering for the purposes of the surface layer’s modification has been observed. The magnetron sputtering method is one of the most im...
BARRIERS OF TECHNOLOGICAL INNOVATION DEVELOPMENT AND IMPLEMENTATION ENCOUNTERED BY R&D ORGANISATIONS
The application of innovations is acknowledged as a driver for economic and social development. However, the processes of technology development and transfer are affected by numerous barriers,...
LOADS EXPERIENCED BY LOAD-BEARING COMPONENTS OF MINE HOIST INSTALLATIONS DUE TO RANDOM IRREGULARITIES AND MISALIGNMENTS OF THE GUIDE STRING
Report data from periodic overhauls of skips and cages operated in one underground mine in Poland indicate that the majority of registered defects of load-bearing elements include broken wires and cracks developing in lo...