Operational efficiency of the lighting system of bus salons
Journal Title: Вісник Житомирського державного технологічного університету. Серія: Технічні науки - Year 2016, Vol 77, Issue 2
Abstract
In recent years the problem of safety of people is studied primarily in aspects of natural and man-made disasters, fire, health and safety in the workplace. A problem connected with the way of life of the people, in particular with the use of bus transport remains almost out of sight. In addition to the foregoing, there is another side to the issue: modern development of industry and transport is characterized by large-scale introduction of technical measures aimed at saving energy In the specified aspect theoretical dependences for evaluation of technological economic efficiency of light sources in indoor lighting system buses are grounded. This theoretical dependency will make analytical framework justification applying the respective sources of light, taking into account the hygiene requirements to illumination. The methodology of calculation of economic efficiency of lighting of bus salons is offered. Estimating parameter is justified relative objective function value costs per unit of time or distance. The greatest costs are typical for lamps with incandescent bulbs. The least is common to lamps with fluorescent lamps. Led bulbs have no significant advantage even over incandescent lamps. The reason for this is the relatively high color temperature radiation of LED lamps that requires more light levels and, consequently, the high cost of energy, as well as relatively large initial cost of these lamps.
Authors and Affiliations
V. M. Brytkovskyi, S. V. Niemyi
Keywords
Related Articles
- EP ID EP253842
- DOI -
- Views 99
- Downloads 0
A study of indicators of expected operational losses in the extraction of block raw materials with disk stone cutting machine
Each technology of production of block natural stone has its advantages and disadvantages. Promising areas of improvement of block stone mining technology is the improvement of non-explosive technologies that do not affe...
Determination of rational conditions of application of rock layered milling combines on iron ore pits
The method of determining the effective use of milling type surface miners for the use of non-blasting technology of layer milling of rocks during open exploration of iron ore deposits has been improved. The non-blasting...
Evaluation influence of machining parameters on shape form errors in turning of machine parts clamped in the chuck with adaptive jaws
The paper deals with the derivation problem of the dependence of machine part geometric form deviation in cross section area on clamping diameter as well as cutting speed, feed and cutting depth in semi finish machining....
Impact on the engine power of a wheeled vehicle mechanical losses when the cylinders are disconnected
A technique for calculating mechanical losses is proposed, which makes it possible, with an accuracy of about 10 %, to determine the effect of the number of disconnected cylinders on the effective engine power, the power...
Stiffness determination of the controlled wheel module of a two-axle vehicle
The conditions of a secure loss of stability of a two-axle wheel vehicle with absolutely hard steering have been found before. The analytically derived conditions of a secure stability loss in case of torsional stiffness...