Optimal Design and analysis of an electromagnetic fault current limiter based on rotating variable reactor
Journal Title: Applied Electromagnetics - Year 2023, Vol 11, Issue 1
Abstract
In this paper, a new electromagnetic fault current limiter with rotary motion is presented. The features of this limiter are its simple structure, low construction and maintenance cost, optimal performance speed, and easy and quick return to initial conditions after the error is corrected. This limiter consists of two spherical air core coils with the ability to rotate freely around the radial axis. In normal conditions, due to the presence of negative mutual inductance between two coils, the total inductance of the limiter has the lowest value. When a fault occurs due to the forces created between two coils, these coils are automatically rotated relative to each other, and the limiting inductance increases rapidly, and the fault current is limited. In this article, for the optimal design of the limiter, the effect of all the limiting parameters such as radius, height, thickness, number of turns and the initial angle of the coils has been investigated and in order to achieve the highest final inductance and the highest operating speed, a suitable value is determined. The results of the simulation show that the designed limiter has a better performance than the initial design and has a good performance speed and final inductance.
Authors and Affiliations
Seyed Amin Fazljoo,Ali Akbar Damaki Aliabad,
Keywords
Related Articles
- EP ID EP730689
- DOI -
- Views 69
- Downloads 0
Investigation of length reduction and radiation power enhancement of short-wavelength free electron laser
Free electron laser technology is one of the most suitable options to achieve high power, coherent radiation in the range of short wavelengths, especially XUV and X. One of the most important challenges in construction o...
Analysis and Simulation of Diffraction from Metamaterials Structures by Using of Surface Integral Equations and Multi-Level Fast Multipole Method (MLFMM) and Comparison with Moment Method
Metamaterial is defined as an artificial, macroscopic, and effectively homogeneous structure (with an average unit cell size much smaller than the guide wavelength). In the electromagnetic literature, the response of a s...
Cogging Torque Reduction Using Axial Pole Shaping in IPM Coaxial Magnetic Gear
In this paper, in order to improve the cogging torque in the radial flux magnetic gear with integer gear ratio, the axial pole skew technique has been used. This design reduces cogging torque by shaping the distribution...
A new simulation method for calculating of temperature and strain at the same time by fiber Bragg grating sensor
Excessive sensitivity of light waves emitted within optical fiber to environmental changes has led to the widespread use of optical fibers as sensors of environmental parameters such as temperature, strain, stress, humid...
Design and construction of high frequency transformers based on resonance converter
High-frequency power transformers are available in electronic power converters for many applications such as power transmission, renewable energy systems, and power supplies. Magnetic materials production technologies su...