OPTIMAL DESIGN OF TAPER ROLLER BEARING ARRANGEMENTS. PART I: OBJECTIVE FUNCTION
Journal Title: ROMANIAN JOURNAL OF TECHNICAL SCIENCES - APPLIED MECHANICS - Year 2017, Vol 62, Issue 3
Abstract
Contrasting previous works in this peculiar field, where bearing rolling elements deformations are regarded as the result of known loads − most likely obtained from the shaft static equilibrium, neglecting the bearing deformations − a system approach conveying ineluctably different results is thereby proposed. The method is grounded on a straightforward theory: when the static equilibrium of the shaft is reached, the loads and moments transmitted from the shaft to the bearings must be balanced by the loads and moments arisen due to the elastic deformations of the rolling elements. In this approach, the formers are obtained using the slope-deflection method, whereas the latter may result from a deformation model of rolling elements of the bearing. The succeeding part of the paper render the precise use of the method broached, mirrored in life calculations of the bearings of particular arrangements. The optimal design of a bearing arrangement (from the maximum bearing lives standpoint) is ultimately illustrated.
Authors and Affiliations
LUCIAN TUDOSE, SIMION HARAGÂŞ, CRISTINA TUDOSE, NICOLETA PREDELEANU, COSTEL URSACHE
Keywords
Related Articles
- EP ID EP304103
- DOI -
- Views 46
- Downloads 0
AN ABSTRACT PATTERN FOR SOME DYNAMICAL MODELS
Previously, several models from mechanics and physics were found that satisfy the same polynomial equation, whose coefficients are purely abstract. These models are: the nonlinear pendulum, the Bernoulli-Euler bar, P.P....
A VIRTUAL INTERNAL BOND MODEL FOR HYSTERETIC MEDIA
In this paper, the properties of the hysteretic media are investigated via the virtual internal bond model (VIB) derived from the hyperelasticity with the integration of the 6–12 Lennard-Jones atomic interacting potentia...
OPTIMAL AUXILIARY FUNCTIONS METHOD FOR THIN FILM FLOW OF A FOURTH GRADE FLUID DOWN A VERTICAL CYLINDER
A new approximate analytical procedure namely the Optimal Auxiliary Functions Method (OAFM) is proposed and has been applied to thin film flow of a fourth grade fluid down a vertical cylinder. The main advantage of our a...
THE CHEMISTRY OF THE RAW WATER TREATED BY AIR-JET ULTRASOUND GENERATOR
The paper presents the sonic treatment effect on the main chemical indicators of the raw water. Also, the paper presents the air-jet ultrasound generator and the experimental laboratory installation for sonic treatment,...
KINEMATIC DESIGN OF 3-RPSR PARALLEL MECHANISM FOR MOVABLE-DIE DRIVE MECHANISM OF PIPE BENDER
The authors have been developing a pipe bender which fabricates pipes of three-dimensional complex shapes from straight pipes based on the penetration bending method. This bender is composed of a movable die supported by...